Galvanized steel coil
Galvanized steel coil is a type of steel coil that has undergone surface galvanizing treatment. It is coated with a layer of zinc on the surface of a substrate (such as cold-rolled or hot-rolled steel plate) to improve its corrosion resistance and service life. The galvanizing process mainly includes two methods: hot-dip galvanizing (hot-dip galvanizing) and electroplating galvanizing. Among them, hot-dip galvanizing is more common, with a thicker zinc layer and stronger protection.
Z275 galvanized steel is a hot-dip galvanized steel product compliant with European Standard EN 10346. Recognized internationally as a high-protection-grade galvanized product, it offers an exceptionally long service life, making it the preferred corrosion-resistant metal material across multiple industries.

Z275 GI Steel Specification
| Item | Z275 GI Steel |
| Thickness | 0.12mm – 6mm |
| Width | ≤1500mm |
| Length | Cut according to coil weight or length |
| Zinc Layer Thickness | 275g/㎡(G90) |
| Spangle Type | Zero spangles, Small spangles, Regular spangles, Big spangles |
| Product Type | Sheet/Coil/Strip |
| technology | Hot-dip galvanizing |
| Surface Treatment | Chromate passivation (C), Chromium-free passivation (C5), Fingerprint resistant treatment (N), Chromium-free fingerprint resistant treatment (N5), Oil coating (O) |
| Steel Grade | SGCC, SGCH, G250, G350, G550, A653, S250GD, S350GD, S550GD, DX51D, DX52D, DX53D, DX54D |
| Standard | GB, EN, JIS, DIN, ASTM |
Zinc Flower Types
- Zero Spangles: Smooth, flat surface ideal for pre-painting or laminating.
- Small Spangles: Delicate texture with a clean visual appearance.
- Regular Spangles: Naturally uniform zinc flowers offering broad versatility.
- Large Spangles: Strong three-dimensional effect with prominent decorative appeal.

Uses of Z275 galvanized steel
Construction industry: It can be used to manufacture anti-corrosion roofs, roof grilles, rolling doors, and garage doors for industrial and civil buildings, providing good protection.
Light industry: In the field of home appliance manufacturing, it can be used to make refrigerator bases and shells, freezer shells, kitchen equipment, solar water heaters, etc., industrial instrumentation and electronic control cabinets, industrial refrigeration equipment, and vending machines.
Automotive industry: It is mainly used to manufacture automotive parts such as body shells, chassis, doors, trunk lids, fuel tanks, car roofs, etc., thanks to its stamping performance and corrosion resistance.
Daily use: It can be used as steel window blanks and color coating substrates, etc., to provide basic material support for the metallurgical industry, household lampshades, counters, signboards, medical facilities.
Other fields: It can also be used to manufacture elevators, sanitary ware, rail transit, pressure vessels, architectural decoration, nuclear power, catering kitchenware, chemical equipment, daily electrical appliances, edible machinery, structural pipe making and other products, with a very wide range.

Coatings
|
Coating designation |
Minimum total coating mass, both surfaces * |
Guidance value for coating thickness per surface |
|---|---|---|
|
Z100 |
100 |
7 |
|
Z140 |
140 |
10 |
|
Z180 |
180 |
13 |
|
Z200 |
200 |
14 |
|
Z225 |
225 |
16 |
|
Z275 |
275 |
20 |
|
Z350 |
350 |
25 |
|
Z450 |
450 |
32 |
|
Z600 |
600 |
42 |
|
ZA095 |
95 |
7 |
|
ZA130 |
130 |
10 |
|
ZA155 |
155 |
11 |
|
ZA185 |
185 |
14 |
|
ZA200 |
200 |
15 |
|
ZA255 |
255 |
20 |
|
ZA300 |
300 |
23 |
|
ZF080 |
80 |
6 |
|
ZF100 |
100 |
7 |
|
ZF120 |
120 |
8 |
|
ZF140 |
140 |
10 |
Mechanical Properties
S220GD is available in thicknesses of 0.45-3.00 mm and widths up to 1520 mm.
S250GD is available in thicknesses of 0.45-3.00 mm and widths up to 1520 mm.
S280GD is available in thicknesses of 0.45-3.00 mm and widths up to 1520 mm.
S320GD is available in thicknesses of 0.50-3.00 mm and widths up to 1520 mm.
S350GD is available in thicknesses of 0.50-3.00 mm and widths up to 1520 mm.
Available as coils, slit coils and as cut to length in lengths up to 6 meters.
|
Coating |
Standard |
Yield strength Re 1) |
Tensile strength Rm |
Elongation A80 2) |
|
|---|---|---|---|---|---|
|
S220GD |
Z, ZA, ZF |
EN 10346 |
220 |
300 |
20 |
|
S250GD |
Z, ZA, ZF |
EN 10346 |
250 |
300 |
19 |
|
S280GD |
Z, ZA, ZF |
EN 10346 |
280 |
360 |
18 |
|
S320GD |
Z, ZA, ZF |
EN 10346 |
320 |
390 |
17 |
|
S350GD |
Z, ZA, ZF |
EN 10346 |
350 |
420 |
16 |


