Difference between galvanized steel coil and cold rolled steel coil.
Can cold rolled steel products be galvanized? The answer is yes, they are two different processes used for different purposes, one for forming and the other for corrosion protection. The only limitation of galvanized steel is that it cannot be used in high temperature conditions; if the surface is scratched, the zinc layer loses its protection at the point of scratch. Cold rolled steel and galvanized steel are popular for a variety of applications. They are very similar. However, given their different production methods, they also have many different characteristics and applications. Keep reading for more details!

Cold rolling and galvanizing are not mutually exclusive; in fact, cold rolled steel can be galvanized. This is because cold rolling is a technique for forming steel, while HDG is a technique for treating steel to prevent it from corroding.
Production Process Differences
Cold rolled steel (CRS) uses hot rolled coil as its material. It is obtained by continuous rolling at room temperature after pickling (at recrystallization temperature) to remove oxide scale. As a result of cold hardening caused by continuous cold deformation, the strength and hardness of rolled steel increase and the toughness and plasticity decrease. Galvanized steel (GI) typically uses cold rolled steel sheet or hot rolled steel sheet as the base material, which is then coated with a layer of zinc by hot-dip galvanizing or electro-galvanizing to enhance the corrosion properties of the base material.

Production and Advantages of Galvanized Steel
Galvanized steel is often referred to as hot-dipped galvanized steel, and as the name suggests, galvanized steel is produced by dipping the steel product into molten zinc, and then the zinc layer is rapidly oxidized in the open air. Zinc is less active in the redox process compared to iron, which is why the zinc coating is so popular for protecting steel products in our lives.
Galvanized steel products can be produced from both cold rolled and hot rolled steel. Typically, hot rolled steel has better yield strength than cold rolled steel because the cold rolling process destroys the grain organization of the steel, while hot rolling improves it. Customers should choose the right steel product for your different applications.


