Galvanized sheet
Galvanized sheet is a type of steel that is coated with zinc for protection by an electroplating process. The galvanized layer is applied to cold rolled steel at low temperatures. Galvanizing is a well-known and effective method to add a protective layer to prevent the exposed steel from being corroded by natural elements. Zinc not only acts as a barrier between the environment and the steel, but it also decomposes first to protect the underlying steel and extend its service life. Zinc is generally represented by Z. Z is the abbreviation of English Zinc. Z275 means that the galvanizing content is 275 grams per square meter, and so on. The number after Z indicates the average coating content at three points on both sides of the galvanized steel in grams per square meter.

Product Parameters
|
Product Name |
Z275 Galvanized Sheet |
|
Thickness |
0.12mm-6.00mm |
|
Width |
600mm-1500mm |
|
Length |
1m-12m, Support Customization |
|
Standard |
AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc. |
|
Zinc Layer |
Hot Galvanizing: 60-275g/m² |
|
Pre-galvanized: 80-275g/m² |
Coatings
The metal coated products are offered with Zinc (Z), Galfan zinc-aluminium (ZA), or Galvannealed zinc-iron alloy (ZF) coating. The cathodic corrosion protection of these metal coatings is in direct proportion to its thickness, i.e. a thick coating will provide better corrosion protection for the underlying steel than a thin coating. However, thin coatings are recommended for applications with high formability requirements.
- Zinc
The Zinc (Z) coating has a composition consisting almost entirely of zinc (>99%) and is lead free, resulting in finely crystallized zinc spangle that meets high requirements for visual appearance. It is produced by hot-dip galvanizing process. Thanks to the good formability of lead-free coatings, the corrosion protection, for example, in areas which have been bent is good. The small spangle coating is designated by the letter M.
- Galfan
Galfan (ZA) is a zinc-aluminium alloy coating with the eutectic composition approximately of 95% Zn and 5% Al. This coating has better anticorrosive and forming properties than normal zinc coatings. Galfan coating can be recognized by its bright metallic and mildly cellular-patterned surface. It is produced by hot-dip coating process.
- Galvannealed
Galvannealed (ZF) is a zinc-iron alloy coating having an iron content of about 10%. This coating is produced by heat-treatment after continuous hot-dip coating process. ZF coated steels are excellent for resistance welding applications and are designed for use in high-quality painted products. Galvannealed coating can be recognized by its typically grayish, matte surface.
|
Coating designation |
Minimum total coating mass, both surfaces * |
Guidance value for coating thickness per surface |
|---|---|---|
|
Z100 |
100 |
7 |
|
Z140 |
140 |
10 |
|
Z180 |
180 |
13 |
|
Z200 |
200 |
14 |
|
Z225 |
225 |
16 |
|
Z275 |
275 |
20 |
|
Z350 |
350 |
25 |
|
Z450 |
450 |
32 |
|
Z600 |
600 |
42 |
|
ZA095 |
95 |
7 |
|
ZA130 |
130 |
10 |
|
ZA155 |
155 |
11 |
|
ZA185 |
185 |
14 |
|
ZA200 |
200 |
15 |
|
ZA255 |
255 |
20 |
|
ZA300 |
300 |
23 |
|
ZF080 |
80 |
6 |
|
ZF100 |
100 |
7 |
|
ZF120 |
120 |
8 |
|
ZF140 |
140 |
10 |
Advantage of Galvanized Steel
1. Excellent corrosion resistance, zinc has more reactive chemical properties than iron and will preferentially react with oxygen and water vapor in the environment to form a dense oxide film. The service life of galvanized steel plates can reach 10-50 years, far exceeding that of ordinary steel plates.
2. High cost-effectiveness and low cost anti-corrosion: Compared with stainless steel or other alloy steels, galvanizing process has lower cost, but can significantly improve the durability of steel plates and reduce maintenance or replacement costs.
3. Good processing performance, galvanized steel sheet can be processed by cutting, bending, welding, etc
4. High strength and lightweight, different strength substrates (such as low carbon steel and high-strength steel) can be selected according to needs.
5. Aesthetics, the galvanized layer presents a silver gray luster, neat and beautiful, suitable for exposed use occasions
6. Environmental friendliness and recyclability: Galvanized steel plates are 100% recyclable, and zinc itself is also a reusable resource.
|
Available Steel Grade(Ensure weight and support third-party testing) |
||||
|
Steel grade |
Coating |
Yield(MPA) |
Tensile(MPA) |
Elongation(%) |
|
DX51D |
Z,ZF |
-- |
270-500 |
20 |
|
DX52D |
Z,ZF |
140-300 |
270-420 |
22 |
|
DX53D |
Z,ZF |
140-260 |
270-380 |
26 |
|
DX54D |
Z,ZF |
140-220 |
270-350 |
30 |
|
S220GD |
Z,ZF |
220 |
300 |
18 |
|
S250GD |
Z,ZF |
250 |
330 |
17 |
|
S280GD |
Z,ZF |
280 |
360 |
16 |
|
S320GD |
Z,ZF |
320 |
390 |
15 |
|
S350GD |
Z,ZF |
350 |
420 |
14 |
|
S400GD |
Z,ZF |
400 |
470 |
-- |
|
S450GD |
Z,ZF |
450 |
530 |
-- |
|
S500GD |
Z,ZF |
500 |
560 |
-- |
|
Select type Galvanized Steel based on requirements |
||||


