Home-Knowledge-

Content

What are the properties of S250GD steel?

Jan 09, 2026

Hot-dip galvanized steel

 

Hot-dip galvanized steel S250GD in accordance with the EN 10346 standard is a high-quality structural steel that has been specially developed for use in the construction industry. With the material number 1.0242, S250GD has a minimum yield strength Rp0.2 of 250 N/mm² and is therefore classified in the medium strength classes of hot-dip galvanized structural steels. The EN 10346 standard not only specifies the chemical composition and mechanical properties, but also defines the hot-dip galvanizing process that creates a uniformly protective zinc coating on the steel surface. The available coatings +Z, +ZF, +ZA, +ZM, +AZ and +AS enable precise adaptation to different environmental conditions and load scenarios.

 

Hot-dip galvanized steel S250GD

Properties

 

S250GD is characterized by a balanced combination of strength, ductility and corrosion resistance. The minimum yield strength Rp0.2 of 250 N/mm² and a tensile strength in the range of 360-510 N/mm² guarantee a reliable load-bearing capacity with sufficient ductility. Thanks to the hot-dip galvanized surface, the steel achieves long-lasting corrosion protection, making it resistant even in aggressive climates and industrial environments.

 

  • The different cover variants offer specific advantages:

+Z (pure galvanized):
Standard corrosion protection for general conditions.

+ZF (zinc-iron):
Improved coating adhesion and increased resistance to mechanical stress.

+ZA (zinc-aluminium):
Optimized resistance in atmospheric environments.

+ZM (zinc-magnesium):
Extended protection in maritime and saline zones through passivating behavior.

+AZ (aluminum-zinc):
Combination of heat resistance and corrosion protection, ideal for high surface temperatures.

+AS (aluminum-silicon):
Especially for applications with extreme temperature influences and high corrosion loads.

 

Z275 GI Steel Specification

 

Item Z275 GI Steel
Thickness 0.12mm – 6mm
Width ≤1500mm
Length Cut according to coil weight or length
Zinc Layer Thickness 275g/㎡(G90)
Spangle Type Zero spangles, Small spangles, Regular spangles, Big spangles
Product Type Sheet/Coil/Strip
technology Hot-dip galvanizing
Surface Treatment Chromate passivation (C), Chromium-free passivation (C5), Fingerprint resistant treatment (N), Chromium-free fingerprint resistant treatment (N5), Oil coating (O)
Steel Grade SGCC, SGCH, G250, G350, G550, A653, S250GD, S350GD, S550GD, DX51D, DX52D, DX53D, DX54D
Standard GB, EN, JIS, DIN, ASTM

 

Coatings

 

Coating designation

Minimum total coating mass, both surfaces *
(g/m2)

Guidance value for coating thickness per surface
(typical µm)

Z100

100

7

Z140

140

10

Z180

180

13

Z200

200

14

Z225

225

16

Z275

275

20

Z350

350

25

Z450

450

32

Z600

600

42

ZA095

95

7

ZA130

130

10

ZA155

155

11

ZA185

185

14

ZA200

200

15

ZA255

255

20

ZA300

300

23

ZF080

80

6

ZF100

100

7

ZF120

120

8

ZF140

140

10

 

Available Steel Grade

 

Available Steel Grade(Ensure weight and support third-party testing)

Steel grade

Coating

Yield(MPA)

Tensile(MPA)

Elongation(%)

DX51D

Z,ZF

--

270-500

20

DX52D

Z,ZF

140-300

270-420

22

DX53D

Z,ZF

140-260

270-380

26

DX54D

Z,ZF

140-220

270-350

30

S220GD

Z,ZF

220

300

18

S250GD

Z,ZF

250

330

17

S280GD

Z,ZF

280

360

16

S320GD

Z,ZF

320

390

15

S350GD

Z,ZF

350

420

14

S400GD

Z,ZF

400

470

--

S450GD

Z,ZF

450

530

--

S500GD

Z,ZF

500

560

--

Select type Galvanized Steel based on requirements

 

FAQ:

 

Q: How is the thickness of the steel sheet relevant to its application?

A: The thickness of the steel sheet affects its strength, weight, and flexibility. Thicker sheets offer more strength and are used in heavy-duty applications, while thinner sheets are lighter and used in applications where weight is a concern, such as automotive parts.

Q: Can S250GD steel be welded?

A: Yes, S250GD steel can be welded. However, appropriate welding techniques are important to maintain the integrity of the galvanized coating and prevent corrosion at the weld joints.

Q: What standards govern the production of S250GD galvanized steel?

A: The production of S250GD galvanized steel is governed by ASTM and EN standards, which ensure consistent quality, thickness, and properties across different batches and manufacturers.

Q: How does the adhesion of the zinc coating affect the performance of galvanized steel coils?

A: The zinc coating's adhesion is crucial for the performance of galvanized steel coils. Good adhesion ensures that the coating remains intact, providing adequate corrosion protection and extending the lifespan of the steel products.

Q: What are the advantages of using hot-rolled galvanized steel?

A: Hot rolled galvanized steel offers several advantages, including improved surface finish, enhanced strength and durability, and resistance to rust and corrosion. It is ideal for applications in harsh environments and where high load-bearing capacity is required.

 

Contact now

SEND INQUIRY

SEND INQUIRY