What are the classifications of steel grating accessories?
Popular specifications are in short supply!
click to get the specification sheet!
Steel bar grating with high strength and firm structure is made up of carbon steel, aluminum steel, or stainless steel. According to the manufacturing methods, it can be divided into four types: welded, press-locked, swage-locked, and riveted gratings. According to the surface shapes, it can be divided into smooth and serrated gratings. With various styles and sizes for choice, steel gratings are widely used in everyday life, such as stair treads, walkways, platforms, floors, various covers, wheeled equipment, security screens, heavy-duty constructions, and so on.
- Classifications of steel grating accessories:
Saddle clips: A special bent-clip type fastener for removable bar grating panels.
G-clips: A special friction fastener can be used with aluminum, stainless steel and galvanized steel.
Grate fast clips: Grating can be connected by one man only, working from above, without the need to drill the steel or weld on site.
Weld lugs: Weld lugs may be used for installations where grating is subject to removal.
Z-clip: This is the most versatile clip anchor. They are especially helpful in holding down riveted grating.
R-clip: A special formed metal fastener available in various sizes to fit any job.
Countersunk land: It is available for aluminum grating only. Not available for steel.
Anchor block: It can be used to fasten permanent or removable grating panels.
- Steel Grating Accessories for Installing
Steel grating accessories are used to install and fix steel grating. They are very necessary. Steel grating accessories have wear resistance, high strength and resistance to stress, rust-proof performance.
| Learn more about the main components of metal bar grating | |
| Span: | Total span. |
| Width: | Panel width. |
| Bearing Bars: | Load carrying the main element. |
| Bearing Bars Spacing: | Measure from center-to-center of the bearing bars in 1/16″ increments. Standard spacing for industrial flooring is 19/16″(1-3/16″) in the center. Other popular spacings are 15/16″, 11/16″, 1/2″, and 7/16″ on center. |
| Bearing Bars Depth: | Ranges from 3/4″ to 7″ depending on anticipated loads. |
| Bearing Bars Thickness: | Ranges from 1/8″ to 1/2″ depending on anticipated loads. |
| Cross Bars: | Used to Secure the position of bearing bars. |
| Cross Bar Spacing: | Measured from center-to-center of cross bars in 1″ increments. Standard spacing is 4″ or 2″ on center. |
Application scenarios of steel grating：
