S350GD galvanized steel
In the world of structural materials, galvanized steel stands out for its unique blend of strength and corrosion resistance-properties amplified in S350GD galvanized steel. As a high-strength grade compliant with the EN 10346 standard, it's created by coating low-carbon structural steel with a zinc layer, making it ideal for outdoor, humid, or load-bearing scenarios like photovoltaic mounting brackets,light steel frames, and highway guardrails.
Looking for a manufacturer that masters both the properties and production of S350GD galvanized steel? You've come to the right place. As a direct factory with 20+ years of galvanized steel expertise, GNEE Steel controls every step from raw material selection to final coating, supplying EN 10346-compliant S350GD products at factory prices. In this guide, we'll break down its key properties, detail the manufacturing process, and share how GNEE Steel ensures consistent quality.

Galvanized steel coil
Key Properties of S350GD Galvanized Steel: Strength & Corrosion Resistance
S350GD galvanized steel's popularity stems from two core property groups: mechanical strength (for structural safety) and anti-corrosion performance (for long service life). Below is a detailed breakdown of GNEE Steel's S350GD specifications.
1. Mechanical Properties of S350GD Galvanized Steel
These properties determine its ability to bear loads and withstand processing, critical for structural applications:
| Mechanical Property | EN 10346 Standard Requirement | GNEE Steel Actual Value | Significance for Use |
|---|---|---|---|
| Yield Strength (Rp0.2) | ≥350 MPa | 360-420 MPa | Ensures it resists deformation under long-term loads (e.g., building frames) |
| Tensile Strength (Rm) | 420-550 MPa | 430-540 MPa | Prevents fracture under sudden stress (e.g., wind loads on guardrails) |
| Elongation (A80mm) | ≥20% (t≤3mm) | ≥22% (t≤3mm) | Allows bending and stamping (e.g., forming curved greenhouse frames) |
| 180° Bend Test | D=2t, No Cracks | D=2t, No Cracks | Guarantees durability during on-site installation (e.g., bending for connections) |
2. Chemical Composition of S350GD Galvanized Steel
The chemical makeup is optimized to balance strength, weldability, and coating adhesion:
| Element | Content Range (%) | Role in S350GD Performance |
|---|---|---|
| Carbon (C) | ≤0.12 | Reduces brittleness and improves weldability for structural assembly |
| Silicon (Si) | ≤0.50 | Enhances zinc coating uniformity and prevents peeling during processing |
| Manganese (Mn) | ≤1.60 | Boosts tensile strength without sacrificing ductility |
| Phosphorus (P) | ≤0.030 | Minimizes corrosion risk and avoids cracking in low temperatures |
| Sulfur (S) | ≤0.025 | Prevents welding defects (e.g., porosity) in structural joints |
| Aluminum (Al) | ≥0.020 | Refines steel grains to improve overall mechanical stability |
3. Corrosion Resistance Properties
The zinc coating is the core of S350GD's anti-rust ability, with GNEE Steel offering multiple coating options:
| Zinc Coating Type | Coating Weight (g/㎡) | Salt Spray Resistance (Hours) | Suitable Environment |
|---|---|---|---|
| Z60 | ≥60 | ≥240 | Dry indoor areas (e.g., workshop shelves) |
| Z140 | ≥140 | ≥480 | Humid inland areas (e.g., urban building walls) |
| Z275 | ≥275 | ≥720 | Coastal/marine areas |
Manufacturing Process of S350GD Galvanized Steel at GNEE Steel
Consistent quality of S350GD galvanized steel depends on strict process control. GNEE Steel follows a 7-step production flow to ensure every batch meets standards:
Step 1: Raw Material Selection
Uses low-carbon steel coils (C≤0.12%) that comply with EN 10025 standards, with no impurities exceeding 0.03% (to avoid coating defects).
All raw materials come with mill certificates for traceability.
Step 2: Cold Rolling (Thickness Control)
Passes steel coils through 5-7 cold rolling stands to reach the target thickness (0.8-6.0mm for S350GD sheets/coils).
Uses automated thickness gauges to ensure tolerance ≤±0.05mm, critical for structural precision.
Step 3: Annealing (Strength & Ductility Optimization)
Heats cold-rolled steel to 700-800℃ in a protective nitrogen atmosphere to relieve internal stress.
Controls cooling rate to achieve the required yield strength (≥350MPa) and elongation (≥20%).
Step 4: Surface Cleaning (Pre-Coating Preparation)
Removes oil, rust, and oxide layers via alkali cleaning, pickling, and water rinsing.
Applies a thin layer of flux to the surface to ensure zinc adhesion during galvanizing.
Step 5: Hot-Dip Galvanizing (Core Anti-Corrosion Step)
Dips cleaned steel into a molten zinc bath (460±5℃) for 3-5 seconds, controlled by computerized immersion speed.
Adjusts zinc bath composition (adding small amounts of aluminum) to improve coating uniformity.
Step 6: Post-Coating Treatment
Uses air knives to control zinc coating thickness (Z60/Z140/Z275 options) and remove excess zinc.
Cools the steel in a water bath to stabilize the coating, then performs passivation to enhance anti-rust performance.
Step 7: Quality Inspection & Cutting
Tests coating thickness (magnetic gauge), mechanical properties (tensile/bend tests), and surface quality (visual inspection).
Cuts coils into sheets of custom lengths (2000-12000mm) or keeps as coils for continuous production needs.

Manufacturing Process of S350GD Galvanized Steel
GNEE Steel's S350GD galvanized steel combines optimized mechanical properties (high strength, good ductility) and reliable corrosion resistance, backed by a strict 7-step manufacturing process. Whether you need it for outdoor infrastructure, light steel construction, or industrial equipment, GNEE Steel's S350GD products deliver consistent quality and performance. For customized specifications or to get the 2026 latest price list, choose GNEE Steel as your trusted partner-we ensure on-time delivery and full quality certification for every order.


