S320GD Galvanized Steel
Hot-dip galvanized steel S320GD in accordance with the EN 10346 standard is a high-strength structural steel specially designed for demanding applications in structural engineering and building construction. With the material number 1.0250, S320GD has a minimum yield strength Rp0.2 of 320 N/mm² and is therefore one of the steels in the higher strength classes. Hot-dip galvanizing in accordance with EN 10346 ensures that a homogeneously applied zinc coating permanently protects the base material against corrosion. The available coatings +Z, +ZF, +ZA, +ZM, +AZ and +AS allow targeted adaptation to different environmental conditions and mechanical stresses, which means that S320GD achieves exceptional durability and cost-effectiveness in construction projects.

S320GD Galvanized Steel Coil Specifications
| Specification | Metric (mm) | Imperial (inch) |
| Thickness | 0.3 – 3.0 mm | 0.012 – 0.118 in |
| Width | 600 – 1500 mm | 23.62 – 59.06 in |
S320GD Equivalent Grades
S320GD is equivalent to the European standard EN10346:2015 grade 1.0250.
GNEE STEEL manufactures S320GD steel in compliance with EN10346:2015 and other international standards, ensuring consistent quality, durability, and corrosion resistance.
S320GD Galvanized Steel Coil Chemical Composition
| Element | Maximum Content (%) |
| Carbon (C) | 0.2 |
| Silicon (Si) | 0.6 |
| Manganese (Mn) | 1.7 |
| Phosphorus (P) | 0.1 |
| Sulfur (S) | 0.045 |
S320GD Galvanized Steel Coil Mecahmical Properties
| Property | Value |
| Tensile Strength (Rm) | 290 – 390 MPa |
| 0.2% Proof Strength (Rp0.2) | ≥ 320 MPa |
| Minimum Elongation (Lo = 80 mm) (A) | ≥ 17% |
Note:
The minimum elongation requirement varies with thickness:
0.5 mm < t ≤ 0.7 mm: The minimum elongation is reduced by 2% compared to the listed value.
0.35 mm < t ≤ 0.5 mm: The minimum elongation is reduced by 4% compared to the listed value.
t ≤ 0.35 mm: The minimum elongation is reduced by 7% compared to the listed value.
The tensile strength range for this grade can vary by up to 140 MPa, depending on processing conditions and coating specifications.
Available Steel Grade
| Steel grade | Coating | Yield(MPA) | Tensile(MPA) | Elongation(%) |
| DX51D | Z,ZF | -- | 270-500 | 20 |
| DX52D | Z,ZF | 140-300 | 270-420 | 22 |
| DX53D | Z,ZF | 140-260 | 270-380 | 26 |
| DX54D | Z,ZF | 140-220 | 270-350 | 30 |
| S220GD | Z,ZF | 220 | 300 | 18 |
| S250GD | Z,ZF | 250 | 330 | 17 |
| S280GD | Z,ZF | 280 | 360 | 16 |
| S320GD | Z,ZF | 320 | 390 | 15 |
| S350GD | Z,ZF | 350 | 420 | 14 |
| S400GD | Z,ZF | 400 | 470 | -- |
| S450GD | Z,ZF | 450 | 530 | -- |
| S500GD | Z,ZF | 500 | 560 | -- |
FAQ:
Q: What are the dimensional specifications for S320GD steel coils?
A: S320GD steel coils are available in various thicknesses, typically ranging from 0.35 mm to 0.50 mm. These coils are produced to meet specific industry standards and dimensional requirements.
Q: How does the zinc coating on S320GD steel improve its properties?
A: The zinc coating on S320GD steel provides better corrosion resistance, significantly enhancing the steel's longevity and performance in harsh environments. This is crucial for maintaining the integrity of structures exposed to the elements.
Q: What standards govern the production of S320GD steel?
A: The production of S320GD steel is regulated by standards such as EN 10147, which specify the chemical composition, mechanical properties, and coating requirements to ensure consistent quality and performance.
Q: Can S320GD steel be used for welding applications?
A: Yes, S320GD steel offers good weldability, making it suitable for various welding applications in construction and manufacturing. Its low-carbon content and specific alloying elements facilitate welding processes.
Q: What is the significance of the longitudinal and coil terms in relation to S320GD steel?
A: Longitudinal refers to the orientation of the steel grain structure, which can impact its mechanical properties. Coils denote the form in which the steel is supplied, allowing for efficient transportation and processing in manufacturing.
Q: How does the base material of S320GD steel contribute to its characteristics?
A: The base material of S320GD steel, typically a low-carbon steel, balances strength and ductility. This makes it ideal for forming and shaping processes while maintaining structural integrity.
Q: What role does manganese play in S320GD steel?
A: Manganese is an essential alloying element in S320GD steel, contributing to its strength and toughness. It also aids in the steel's ability to undergo annealing processes, improving its overall mechanical properties.


