S280GD+ZM Zn-Al-Mg Coated Steel Coil for Corrosion-Resistant Structures

 

S280GD+ZM is a structural steel grade with a zinc-aluminium-magnesium (Zn-Al-Mg) coating, specified under EN 10346 for continuously hot-dip coated steel flat products.

 

The designation can be generally understood as follows:

 

Designation	Meaning
S	Structural steel
280	Minimum yield strength level of approximately 280 MPa
GD	Structural/forming quality designation
+ZM	Zinc-Aluminium-Magnesium coating

 

 

Item	Specification
Product	S280GD+ZM Zn-Al-Mg Steel Coil
Standard	EN 10346
Steel Grade	S280GD+ZM
Base Material	Structural Steel
Minimum Yield Strength	Approx. 280 MPa
Coating Type	Zn-Al-Mg
Product Form	Coil / Sheet
Thickness	Customized according to requirements
Width	Customized according to requirements
Coating Weight	Customized according to project requirements
Surface	Standard / Customized
Edge	Mill Edge / Slit Edge
Processing	Slitting, Cutting and Other Processing Options
Application	Solar Mounting Structures, Construction and Industrial Components

 

Actual dimensional ranges, coating weights, mechanical properties, surface conditions, and other technical requirements should be confirmed according to the applicable standard and the agreed purchase specification.

 

Ask for Sample & Quote

 

 

1. Structural Strength

S280GD+ZM provides a minimum yield strength level of approximately 280 MPa, making it suitable for structural components where strength and efficient material utilization are important.

 

2. Enhanced Corrosion Protection

The Zn-Al-Mg coating provides effective corrosion protection for steel substrates and can offer improved performance in many outdoor atmospheric environments. This makes S280GD+ZM particularly attractive for applications exposed to moisture and changing weather conditions.

 

3. Suitable for Outdoor Applications

Solar mounting systems, structural profiles, roofing components, and other outdoor steel structures can be exposed to rain, humidity, temperature changes, and other environmental factors. S280GD+ZM combines structural performance with a corrosion-resistant coating system for these applications.

 

4. Suitable for Forming and Fabrication

Depending on the specified product condition and processing requirements, S280GD+ZM can be used for forming, cutting, punching, profiling, and other fabrication processes. This provides flexibility for manufacturers producing structural profiles and finished components.

 

5. Lower Maintenance Requirements

A suitable Zn-Al-Mg coating can help improve corrosion protection and reduce maintenance requirements over the service life of properly designed and installed steel components.

 

 

In addition to photovoltaic systems, S280GD+ZM can be considered for various structural and outdoor applications, including:

1.Construction

• Roofing components
• Wall and framing systems
• Structural profiles
• Building components
• Light structural systems

 

2.Industrial Applications

• Equipment frames
• Support structures
• Fabricated steel components
• Outdoor structural profiles
• General industrial applications

 

The appropriate grade, thickness, coating weight, and processing method should be selected according to the actual application and operating environment.

 

 

S280GD+ZM and conventional galvanized steel are both used for corrosion-protected steel products, but their coating systems are different.

 

Feature	S280GD+ZM	Conventional Galvanized Steel
Coating	Zinc-Aluminium-Magnesium	Zinc
Structural Grade	S280GD	Depends on grade
Yield Strength	Approx. 280 MPa minimum level	Depends on grade
Corrosion Protection	Zn-Al-Mg coating system	Zinc coating system
Outdoor Applications	Suitable	Widely used
Solar Applications	Suitable for many structural components	Suitable depending on grade and design
Material Selection	Based on strength, environment and coating requirements	Based on strength, environment and zinc coating requirements

 

S280GD+ZM should not be selected simply because it has a Zn-Al-Mg coating. The correct material depends on the project's structural requirements, environmental conditions, fabrication process, expected service life, and total cost.

 

 

For a faster quotation, buyers can provide the following information:

If you already have a technical specification, drawing, or material requirement, you can send it directly to GNEE STEEL for review.
 

Ask for Sample & Quote

 

1.What is S280GD+ZM steel?
S280GD+ZM is a structural steel grade with a zinc-aluminium-magnesium coating, combining a minimum yield strength level of approximately 280 MPa with enhanced corrosion protection.

 

2.What does 280 mean in S280GD+ZM?
The number 280 represents the minimum yield strength level of approximately 280 MPa.

 

3.What does ZM mean in S280GD+ZM?
ZM refers to a zinc-aluminium-magnesium coating system applied to the steel substrate.

 

4.What standard covers S280GD+ZM?
S280GD+ZM is designated under EN 10346, which covers continuously hot-dip coated steel flat products.

 

5.Is S280GD+ZM suitable for solar mounting systems?
Yes. S280GD+ZM is suitable for many solar mounting applications because it combines structural strength with Zn-Al-Mg corrosion protection.

 

6.Can S280GD+ZM be used for C channels?
Yes. S280GD+ZM can be used for C channels and other formed structural profiles when the selected thickness, coating, forming process, and design requirements are appropriate.

 

7.Is S280GD+ZM better than galvanized steel?

S280GD+ZM can provide advantages in corrosion protection, but the best material depends on the project's environment, structural requirements, coating specification, processing method, and cost.