Color coated steel coil stock GNEE-Steel
Basic definition of color coated steel coil

Color-coated steel plate (commonly known as color-coated steel plate) is a galvanized steel plate (hot-dip galvanizing, electro-galvanizing). After surface pretreatment (degreasing, chemical treatment), it is painted using the roller coating method, and then baked and cooled. Steel panels are coated with one or more layers of liquid paint of different colors.
Coating structure layer type:
Two coats and two bakes (2/2): Corrugated tiles (corrugated boards) are not suitable for use as sandwich panels.
Two coatings and one baking (2/1): composite panel (sandwich panel).
Two coated and one baked tape M (2/1M): Made of corrugated cardboard and sandwich board.
One coat and one bake (1/1): The most typical example-GNEE STEEL.
Other special requirements: such as 2/0
Steel coil rolling direction
Rolling: The topcoat is on the outside and is being rolled up.
Color coated steel coil specifications and weight
Thickness specifications: between 0.14 and 1.5, regular specifications: 0.286, 0.3, 0.326, 0.35, 0.376, 0.4, 0.426, 0.45, 0.476, 0.476, 0.526, 0.526, 0.55, 0.576, 0.576, 0.6, 0.6, 0.6, 0.8, 0.8, 1.0, 1.2.
Width specifications: ordinary specifications 1000, 1200, special specifications 914, 1250, other special specifications, 1250 other special specifications.
Volume weight: generally 3 tons to 5 tons.

Common quality problems of color-coated steel coils
Color difference, paint peeling, slippage, scratches, deformation, pits, black spots, surface wrinkles, blistering, water marks, coating peeling after lamination, deviation, and paint peeling.
Steel coil processing, storage and transportation tips
Precautions for shearing and processing: The table surface in contact with the color-coated plate during shearing should be covered with a rubber mat and kept clean to minimize burrs on the shearing surface. The chips and metal burrs generated during short cutting should be removed promptly to prevent the steel plate from being sheared. Coatings scratch each other when stacked.

Storage and transportation requirements: Steel coils must not be wetted by water and should be stored indoors and avoid open storage. If condensation occurs due to rain, remove the moisture immediately and use it as soon as possible. Steel coils must not be stacked to avoid damage to the coated coils and steel plates. To prevent collisions and injuries, special spreaders must be used during loading and unloading.


