Home-Knowledge-

Content

Low-carbon steel for cold forming DX53D | 1.0951

Dec 30, 2025

galvanized steel sheet

 

DX53D (material number 1.0951) is a premium-grade hot-dip galvanized steel sheet specified under EN 10346, specifically engineered for deep drawing and complex forming operations. The combination of low carbon content, optimized microstructure, and uniform zinc coating makes DX53D a top choice for manufacturers who demand high formability, surface quality, and corrosion resistance in one material.

 

DX53D galvanized steel sheet delivers outstanding mechanical stability during stamping, bending, and shaping, reducing defects such as cracking, orange peel, and coating delamination.

 

hot-dip galvanized steel sheet

Properties according to DIN EN 10 346

 

Steel type

Short designation VDA239-100* Surface finish Material number
DX53D CR2 +Z,+ZF,+ZA,+ZM,+AZ,+AS 1.0951

* Comparative grade, therefore minor deviations from DIN EN values possible

 

DX53D | 1.0951: Mechanical properties (transverse)

Yield strength 1) Re MPa max. Tensile strength Rm MPa Elongation at 2) fracture A80 % min. Anisotropy r90 min. Strain hardening exponent n90 min.
140–260 270–380 30 - -

DX53D | 1.0951: Chemical composition (heat analysis)

Percentage by weight % max.
C Si Mn P S Ti
0.12 0.50 0.60 0.10 0.045 0.30

 

1) Where no yield strength is defined, the respective values shall apply to the 0.2 % proof stress Rp0.2, otherwise for the lower yield strength (ReL).

2) Reduced minimum values of elongation at fracture apply to product thicknesses 0.50 mm < t < 0.70 mm (minus 2 units), 0.35 mm < t < 0.50 mm (minus 4 units), and t < 0.35 mm (minus 7 units).

 

DX53D Galvanized Steel Applications

 

Automotive Industry: Car body panels, inner structural parts, reinforcement components, fuel tanks, chassis components, battery casings, and decorative trims.

Household Appliances: Washing machine drums, refrigerator panels, oven enclosures, air conditioner casings, dishwasher interiors, and microwave oven structures.

Construction and Roofing: Metal cladding, roofing sheets, wall panels, structural profiles, rainwater drainage systems, garage doors, and insulation-backed panels.

Electrical and Industrial Equipment: Electrical enclosures, control cabinets, transformer casings, air ventilation ducts, industrial storage units, and safety barriers.

Furniture and Decorative Applications: Storage cabinets, office furniture frames, shelving systems, modular partitions, architectural facades, and decorative panels.

 

DX53D Material Properties

 

Exceptional Formability – DX53D is specifically engineered for deep drawing without cracking or material failure, making it suitable for intricate shapes and stamped components.

Superior Corrosion Resistance – The hot-dip galvanized zinc coating protects against rust, oxidation, and environmental exposure, significantly extending the material's lifespan.

Smooth Surface Quality – Available in NA, MA, MB, and MC surface finishes, DX53D ensures aesthetic appeal and consistent coating adhesion, making it ideal for painted or coated applications.

Good Weldability – Compatible with various resistance welding, arc welding, and laser welding techniques, ensuring easy integration into assembly lines.

High Ductility – The low-carbon steel base provides excellent flexibility and bendability, allowing it to be shaped into complex geometries without losing mechanical integrity.

 

DX53D Galvanized Steel Coil Chemical Composition

 

Element Maximum Content (%)
Carbon (C) 0.12
Silicon (Si) 0.5
Manganese (Mn) 0.6
Phosphorus (P) 0.1
Sulfur (S) 0.045
Titanium (Ti) 0.3

 

DX53D Galvanized Steel Coil Mecahmical Properties

 

Property Value
Tensile Strength (Rm) 270 – 380 MPa
Yield Strength (Re) / (Rp0.2) 140 – 260 MPa
Minimum Elongation (A80) ≥ 30%

 

GNEE STEEL strictly follows EN 10346 production standards, controlling chemical composition, coating thickness, surface roughness, and flatness. Each batch is inspected for mechanical performance, coating adhesion, and corrosion resistance to guarantee consistent quality.

 

In addition to DX53D galvanized sheets, GNEE STEEL also supplies:

  • DX51D / DX52D / DX54D galvanized steel
  • Galvalume steel sheets & coils
  • Pre-painted galvanized steel (PPGI)
  • Cold rolled steel sheets
  • Hot rolled steel coils

These product lines allow customers to source complete steel solutions from one reliable supplier.

Contact now

 

Mechanical Properties

Grade Coating Standard Yield strength Re (MPa) Tensile strength Rm (MPa) Elongation A80 (min %) r90 (min) n90 (min)
DX51D Z, ZA, ZF EN 10346 - 270 – 500 22 - -
DX52D Z, ZA, ZF EN 10346 140 – 300 ²) 270 – 420 26 - -
DX53D Z, ZA, ZF EN 10346 140 – 260 270 – 380 30 - -
DX54D Z, ZA, ZF EN 10346 120 – 220 260 – 350 36 1.6 ⁴) 0.18
DX56D Z, ZA, ZF EN 10346 120 – 180 260 – 350 39 1.9 ⁵) 0.21 ⁵)
DX57D Z, ZA EN 10346 120 – 170 260 – 350 41 2.1 ⁵) 0.22

 

SEND INQUIRY

SEND INQUIRY