Key Steps and Quality Control of Interlocking Steel Grating Process
In modern industrial platforms and drainage systems, interlocking steel gratings are widely used load-bearing structural products due to their high strength and stability. The image shows the practical process of interlocking steel grating testing. Through manual measurement and gauges, the accuracy of grating dimensions, ring fit, and load-bearing structure is ensured. This process directly affects the safety and lifespan of the product in later use.
Interlocking steel gratings are typically made of flat and square steel bars interlocked and welded together, featuring a compact structure, uniform stress distribution, and high impact resistance. To ensure installation accuracy, the dimensions of the ring or square frame are checked before production, especially for custom gratings used in circular areas such as equipment foundations, sewage well covers, and ventilation openings. During the testing phase, operators use diameter measurements and interlocking gap checks to ensure that the steel grating can be assembled smoothly without loosening or deformation.

In terms of surface treatment, hot-dip galvanized grating effectively enhances corrosion resistance, making it suitable for high-humidity and high-corrosion environments such as ports, metallurgy, chemical plants, and energy storage facilities.
Before shipment, the company conducts multiple inspections, including weld quality, load testing, and dimensional deviation control, to ensure that the products meet international standards (such as ISO, EN, or ASTM specifications).
With the upgrading of global infrastructure, customized interlocking steel grating is becoming the preferred solution for industrial platforms, equipment supports, and drainage manhole cover systems.

|
Specification of steel grating |
|||
|
No. |
Item |
Description |
|
|
1 |
bearing bar |
20 x 5, 25 x 3, 30 x 3, 30 x 5, 32 x 3, 32 x 5, etc. |
|
|
2 |
bearing bar pitch |
15mm, 25mm, 30mm, 40mm, 50mm, or as customers' requirement |
|
|
3 |
cross bar |
5 x 5, 6 x 6 (twisted bar or round bar) |
|
|
4 |
cross bar pitch |
40mm, 50mm, 60mm, 100mm, or as customers' requirement |
|
|
5 |
flat bar type |
plain, serrated (tooth-like), I bar (I-section), serrated I-shape bar |
|
|
6 |
surface treatment |
untreated, hot dip galvanized,powder coated, and electro polished, etc. |
|
|
7 |
steel grating standards |
China: YB/T4001.1-2007; US: ANSI/NAAMM(MBG531-88); UK: BS4592-1987 |
|
|
8 |
steel product standard |
China: GB700-88; US: ASTM(A36); UK: 43A |
|
|
9 |
hot galvanized standard |
China: GB/T13912; US: ASTM(A123); UK: BS729 |
|
Popular specifications are in short supply!
click to get the specification sheet!


