Dx53D+Z Galvanized Steel Coil
Product: Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming
Grade: DX53D+Z,
DX53D+Z steel quality: Drawing quality
DX53D+Z steel coating finish:
N (Normal spangle), M (Minimized spangle), R (Regular zinc-iron alloy coating)
DX53D+Z steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
DX53D+Z steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiling), CO(Chemical passivation and oiling), S ( Seales), P(Phosphated), U(Untreated)
DX53D+Z steel Coil/strip/sheet coating mass: Z60, Z80, Z100, Z140, Z200, Z225, Z275, Z350, Z450, Z600
DX53D+Z steel Coil/strip/sheet coating: Z ( Pure Zinc)
EN10346 DX53D+Z steel suitable size: Thickness 0.3mm-3.0mm

-
DX53D+Z steel chemical composition % by mass max
| Grade |
Material No. |
C |
Si |
Mn |
P |
S |
Ti |
|
DX53D+Z |
1.0355+Z |
0.12 |
0.50 |
0.60 |
0.10 |
0.045 |
0.30 |
- DX53D+Z steel Mechanical properties
| Grade |
Material No. |
R90 min |
N90 |
Yield Strength MPa |
Tensile strength MPa |
Elongation A80 min |
|
DX53D+Z |
1.0355+Z |
- |
- |
140-260 |
270-380 |
30 |
- Available Steel Grade
| Steel grade | Coating | Yield(MPA) | Tensile(MPA) | Elongation(%) |
| DX51D | Z,ZF | -- | 270-500 | 20 |
| DX52D | Z,ZF | 140-300 | 270-420 | 22 |
| DX53D | Z,ZF | 140-260 | 270-380 | 26 |
| DX54D | Z,ZF | 140-220 | 270-350 | 30 |
| S220GD | Z,ZF | 220 | 300 | 18 |
| S250GD | Z,ZF | 250 | 330 | 17 |
| S280GD | Z,ZF | 280 | 360 | 16 |
| S320GD | Z,ZF | 320 | 390 | 15 |
| S350GD | Z,ZF | 350 | 420 | 14 |
| S400GD | Z,ZF | 400 | 470 | -- |
| S450GD | Z,ZF | 450 | 530 | -- |
| S500GD | Z,ZF | 500 | 560 | -- |
Main products: galvanized steel sheet, steel pipes, steel plates, steel coils, steel bars, steel strips, cold-rolled steel sheets, cold-rolled steel coils,stainless steel series, carbon steel series, high-strength steel series, nuclear grade steel, galvanized steel, steel for wind and solar energy, etc.



