DX52D Galvanized Steel Coil
Gnee can supply hot rolled and cold rolled DX52D galvanized steel coil. DX52D Galvanized Steel Coil has good weldability and corrosion resistance. Good formability makes DX52D galvanized steel coil can be easily shaped and formed without compromising its structural integrity. It is often used in applications where complex shapes are required. A Large And Diverse Inventory of DX52D galvanized steel coil; competitive pricing and customised DX52D galvanized steel solutions; one supplier for your entire DX52D galvanized steel needs;
Gnee supply DX52D cold rolled and hot rolled galvanized steel coil, with 100% factory low price and high-quality. We can manufacture and sell galvanized steel coils with a width of 800-1250mm and a coating weight of 60-300g/m3. We manufacture galvanized steel coils according to EN 10346, ASTM A653 standard. We have sufficient galvanized steel coil stock for fast delivery.
Thickness, width, length, zinc layer, standard, material, etc. can all be customized. Gnee can provide normal spangle, skinpassed spangle, regular spangle, minimized spangle or customize it for your requirements.
DX52D Galvanized Steel Coil Specifications
| Width | 600-2,000mm (can be customized) | Thickness | 0.2-4.0mm or as you request (can be customized) |
| Coil Weight | 3-8 Tons (can be customized) | Type | Hot-dip galvanized, Electro-galvanized |
| Zinc coating thickness | Min. Single Side Coating Thickness: 20 g/m2 Max. Single Side Coating Thickness: 225 g/m2 |
Base Material | Cold Rolled Coil or Hot Rolled Coil |
| Standard | AISI, ASTM, BS, GB, JIS | ||
| Grade | DX52D | ||
| Spangle | Zero Spangle, Small Spangle, Regular Spangle, Big Spangle | ||
| Hardness | Soft hard(<60),medium hard(HRB60-85),full hard(HRB85-95) | ||
| Certificates | SGS, ISO 9001, CE | ||
| Package | Standard export seaworthy packing: 3-layer packing. The inside is kraft paper, the middle is water plastic film and the outside Gi steel coil to be covered by lockable steel strips, with inner coil sleeve or as customer demands. | ||
Chemical Composition(%)
| Grade | C | SI | MN | P | S | TI |
| (MAX %) | (MAX %) | (MAX %) | (MAX %) | (MAX %) | (MAX %) | |
| DX52D | 0.12 | 0.5 | 0.6 | 0.1 | 0.045 | 0.3 |
What Services Does Gnee Provide?
Gnee can provide the following measurement services for galvanized steel products:
Coating Thickness: Measurement of the thickness of the zinc coating on the galvanized steel surface. This is crucial for ensuring that the steel has an adequate protective layer.
Dimensions: Checking and documenting the dimensions of the galvanized steel, including length, width, and thickness of the steel itself.
Weight: Determining the weight of the galvanized steel, which may include both the steel and the zinc coating. This is often measured in pounds or kilograms.
Surface Inspection: Examining the surface quality of the galvanized steel for any defects, imperfections, or irregularities.
Adherence to Standards: Verifying whether the galvanized steel meets specific industry or international standards for quality and performance.
Corrosion Resistance Testing: Assessing the corrosion resistance of the galvanized steel, which is a key property of the zinc coating.
