Home-Knowledge-

Content

Hot DIP Gi SGCC Zinc Coated Steel Gi Galvanized Steel Coil with Zero Spangle

Oct 29, 2025

SGCC Galvanized steel coil

 

Galvanizing is an economical and effective antirust method which is often used.

Also known as hot dip galvanized steel coil SGCC (galvanized iron), this type of steel is made by dipping coils of cold-rolled or hot-rolled steel into a bath of molten zinc, creating a protective layer that prevents corrosion and extends the life of the material.

SGCC (Steel Grade Coating Composition) is often used as a quality benchmark for evaluating the efficiency of hot dip galvanized steel coils and sheets.

SGCC GI steel coil and SGCC GI steel coil are synonymous with durability, strength and versatility. Combining the superior properties of galvanization with the ability to create thin, lightweight materials, galvanized steel has become the preferred choice across a variety of industries.

Hot-dip galvanizing reacts molten metal with an iron matrix to produce an alloy layer, thereby combining the matrix and the coating.The identification of Japanese steel plate grades: SGCC, HOT-DIP GALVANIZED STEEL is Hot Dipped Galvanized Steel Coils or Hot Dipped Galvanized Steel Sheets.

SGCC Galvanized Steel Coil
Grade SGCC Galvanized steel coil/SGCC Galvanized steel sheet
Thickness 0.1-4mm
Width 500-1250mm
Zinc coating 30-275g/m2
Surface chromated,un-oiled,dry
Spangle regular,minimized,big spangle,zero spangle
Coil weight 4-12mt

 

Hot dip galvanizing is to pickle the steel parts first.In order to remove the iron oxide on the surface of the steel parts, after pickling, they are cleaned in an aqueous solution of ammonium chloride or zinc chloride or a mixed aqueous solution of ammonium chloride and zinc chloride, and then sent into the hot dip plating tank.
The so called hot dip plating is a method of immersing a base metal in another low melting point metal in a molten state to form a metal protective film on its surface.

 

  • Product Specifications
Steel grades Chemical composition%
Residual Element
>
Tensile strength
(MPa)
Yield strength
(MPa)
C%
<
Si%
<
Mn%
<
P%
<
S%
<
Alt
<
SGCC, DX51D+Z 0.07 0.03 0.50 0.025 0.025 0.020
Cu<0.10
Ni<0.08
Cr<0.10
As<0.05
Sn<0.05
270-500 140-280
DX52D+Z 0.06 0.03 0.45 0.025 0.025 0.020 270-420 140-300
DX53D+Z 0.03 0.03 0.40 0.020 0.020 0.020 270-380 140-260
S220GD+Z 0.17 0.30 1.00 0.035 0.30 0.020 300-440 >220
S250GD+Z 0.17 0.30 1.00 0.035 0.30 0.020 330-470 >250
S350GD+Z 0.20 0.55 1.60 0.035 0.30 0.020 420-560 >350

 

SEND INQUIRY

SEND INQUIRY