The difference between stainless steel and cold-rolled steel is very big. The common maximum thickness of cold-rolled steel is 8mm. Hot-rolled steel coils are generally used as raw materials to make beautiful and easy-to-use cold-rolled steel sheets. Each coil can reach 13.5 tons. Stainless steel is different. Stainless steel has no specified thickness, and its raw materials are generally not limited to steel, but also include nickel, chromium, and molybdenum, all of which are metals. Stainless steel has certain corrosion resistance, and ordinary chemical properties will not cause it to corrode.
① Stainless steel is a type of steel, and cold-rolled steel is a type of steel!
② Stainless steel refers to steel that is resistant to corrosion by weakly corrosive media such as air, steam, water, and chemically corrosive media such as acids, alkali, and salts. It is also called stainless acid-resistant steel. In practical applications, steel that is resistant to corrosion by weakly corrosive media is often called stainless steel, while steel that is resistant to corrosion by chemical media is called acid-resistant steel. Due to the difference in chemical composition between the two, the former is not necessarily resistant to corrosion by chemical media, while the latter is generally stainless.

The corrosion resistance of stainless steel depends on the alloying elements contained in the steel. The basic alloy elements of stainless steel include nickel, molybdenum, titanium, niobium, copper, nitrogen, etc. to meet the requirements for the structure and performance of stainless steel for various purposes. Stainless steel is easily corroded by chloride ions, because chromium, nickel, and chlorine are isotopic elements, and the isotopic elements will exchange and assimilate to cause corrosion of stainless steel.
Cold-rolled steel is made of hot-rolled coils as raw materials and rolled at room temperature and below the recrystallization temperature. It includes plates and coils and can be produced by many domestic steel plants such as Baosteel, Wuhan Iron and Steel, Anshan Iron and Steel, etc. Among them, those delivered in sheets are called steel plates, also called box plates or flat plates; those that are very long and delivered in rolls are called steel plates, also called coiled plates.
③General cold-rolled steel: refers to products in the general carbon steel category that are rolled into plates (usually rolled into a roll). Others include bars, wire rods, etc.
Stainless steel refers to alloy steel with added elements such as Cr and Ni. Its representative steel type is 304 stainless steel. Stainless steel is also divided into plates, bars, profiles, wires, etc.
④Cold-rolled steel: It has high strength, but poor toughness and weldability, is relatively hard, brittle, and has a bright surface.
Stainless steel: beautiful surface and diversified use possibilities. Good corrosion resistance and longer durability than ordinary steel. Good corrosion resistance and high strength, so the possibility of using thin plates is high. Resistant to high temperature oxidation and high strength, so it can resist fire and be processed at room temperature, that is, it is easy to process. Plastic processing does not require surface treatment, so it is simple, easy to maintain and clean, and has high smoothness and good welding performance.

We know that stainless steel is a type of steel, which is divided into many types, such as ferritic stainless steel. Austenitic stainless steel, precipitation hardened stainless steel, etc., and cold-rolled steel is cold-rolled steel. It has its own kind, unlike the general term "stainless steel". When we buy stainless steel, we can buy different stainless steel according to what we need. Buying cold-rolled steel is a targeted purchase. The only material we buy is cold-rolled steel. This must be clearly understood.


