galvanized steel strip DX51

The galvanized steel strip is a commonly used metal material with excellent corrosion resistance and good forming properties, so it is widely used in construction, transportation, electronics, etc. DX51D is a specification of a galvanized steel strip. "D" denotes galvanized sheet."X "indicates that the substrate is hot rolled."51″ serial number, no specific meaning, represents the general use.
The yield strength of DX51 galvanized metal strips are 270-370MPa, which has high strength and hardness and can meet the requirements of construction, transportation and other fields. In addition, the G.I. strips have good impact resistance and wear resistance, which can maintain good performance in complex environments.
General galvanized steel strip processing process:
(1) pickling (to remove iron oxide on the surface of the strip)
2) cold rolling (rolling thin, improving wall thickness tolerance, surface finish)
3) galvanized (in the iron substrate to form a zinc-iron alloy layer + zinc layer, anti-corrosion, beautiful)
4) Delivery (part of the product after slitting and slitting, to the net edge state delivery)
Special Note: Some of the thicker galvanized steel strips (such as the thickness of 2.5mm or more), do not need cold rolling, or pickling directly after galvanizing, called pickling straight plating, this mainly depends on the downstream product requirements.

GNEE STEEL are manufacturer of steel products. We have quality steel coils and sheets for sale. Except for GI coils and sheets, we also have GL, PPGI, PPGL, Corrugated sheet, etc. to choose from. The standard seaworthy package contains waterproof kraft paper and plastic film inside, and steel sheets outside, then bound with steel strips. To secure it during transportation, we use wood pallets. During the two decades, we have developed complete systems from pre-sales consulting to after-sales service. Welcome to contact us for more information!
- Product Specifications
| Product Name | Galvanized Strip | ||
| Thickness | 0.12-4mm | ||
| Width | 20-600mm | ||
| Tolerance | Thickness: ±0.01mm Width: ±2mm | ||
| Zinc Coating | 30-400g/m2 | ||
| Grade of Materials | SGCC SGCD SGCE |
DX51D+Z DX52D+Z DX53D+Z DX54D+Z DX56D+Z DX57D+Z |
S250GD+Z S280GD+Z S350GD+Z S550GD+Z |
| Surface Treatment | Oiled, Passivation,Dry... | ||
| Spangle | Regular,Small, Big, Zero | ||
| Hardness | Full Hard, Half Hard, Soft | ||
| ID Coil | 508mm or 610mm | ||
| Coil Weight | 1-3 tons per coil, or as your requirements | ||
| Package | Standard export package (Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet) |
||
| Application | Construction, Industrial panels, roofing and siding for painting | ||
| Trade Terms | EXW,FOB, CFR, CIF... | ||
| Delivery time | Within 15 workdays after deposit received | ||


