What Is DX53D Hot-dip Galvanized Steel?
DX53D galvanized steel is low-carbon steel coated with a layer of zinc through a hot-dip galvanizing process. This coating enhances its corrosion resistance, making it ideal for applications that require high formability and durability. Unlike standard galvanized steel, DX53D is specially designed for deep drawing, meaning it can be stretched and shaped into complex forms without cracking or losing strength.
What Does the DX53D Name Mean?
D – Indicates it is designed for deep-drawing applications
X – Indicates the steel is not specified for a particular strength level, allowing for high ductility.
53 – Represents the deep drawing grade, which is more formable than DX51D and DX52D.
D – Means the steel is hot-dip galvanized.
DX53D Steel Equivalent Grades
Under the EN 10346:2009 standard, DX53D corresponds to steel grade 1.0355. In the EN 10346:2015 standard, its equivalent designation is 1.0952.

Properties according to DIN EN 10346
Steel type
| Short designation | VDA239-100* | Surface finish | Material number |
| DX53D | CR2 | +Z,+ZF,+ZA,+ZM,+AZ,+AS | 1.0951 |
* Comparative grade, therefore minor deviations from DIN EN values possible
DX53D | 1.0951: Mechanical properties (transverse)
| Yield strength 1) Re MPa max. | Tensile strength Rm MPa | Elongation at 2) fracture A80 % min. | Anisotropy r90 min. | Strain hardening exponent n90 min. |
| 140–260 | 270–380 | 30 | - | - |
DX53D | 1.0951: Chemical composition (heat analysis)
| Percentage by weight % max. | |||||
| C | Si | Mn | P | S | Ti |
| 0.12 | 0.50 | 0.60 | 0.10 | 0.045 | 0.30 |
DX53D Steel Product Size Range
GNEE STEEL DX53D steel is available in sheets, plates, coils, pipes, and tubes. Below is a detailed size range for each product form.
We also offer custom DX53D galvanized steel roofing sheets and PPGI DX53D steel products to meet specialized industry needs.
| Product Form | Thickness (mm / in) |
Width (mm / in) | Length (mm / ft) | Diameter(mm / in) |
| DX53D Sheet | 0.4 – 3.2 mm (0.016 – 0.126 in) | 600 – 1500 mm (23.6 – 59 in) | Up to 6000 mm (19.7 ft) | N/A |
| DX53D Plate | 3.2 – 12 mm (0.126 – 0.472 in) | 1000 – 2500 mm (39.4 – 98.4 in) | Up to 12000 mm (39.4 ft) | N/A |
| DX53D Coil | 0.4 – 3.2 mm (0.016 – 0.126 in) | 600 – 1500 mm (23.6 – 59 in) | Custom coil length | N/A |
| DX53D Pipe | 1.5 – 10 mm (0.059 – 0.394 in) | N/A | Up to 12000 mm (39.4 ft) | 21 – 610 mm (0.83 – 24 in) |
| DX53D Tube | 1.0 – 8 mm (0.039 – 0.315 in) | N/A | Up to 12000 mm (39.4 ft) | 10 – 400 mm (0.39 – 15.7 in) |
- Chemical Composition
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |


