Home-Knowledge-

Content

Dx51d Z275 3.8mm Hot Dipped Galvanized Steel Sheet

Overview

 

The DX51D Z275 Hot-Dipped Galvanized Steel Sheet is a premium-grade cold-rolled steel coated with a 275 g/m² zinc layer through hot-dip galvanization.

 

DX51D Z275 Hot-Dipped Galvanized Steel Sheet

 

With a thickness of 3.8 mm, this steel sheet combines superior corrosion resistance, excellent strength, and reliable durability, making it ideal for a wide range of industrial, construction, and manufacturing applications.

 

Key Features

 

1. Superior Corrosion Resistance

The Z275 zinc coating provides a robust protective barrier against rust and corrosion, making it suitable for outdoor environments and harsh weather conditions. The metallurgically bonded zinc layer ensures long-lasting protection and reduced maintenance costs.

 

2. High Strength & Structural Reliability

With a thickness of 3.8 mm, the DX51D sheet maintains structural integrity and tensile strength, allowing it to withstand heavy loads, making it ideal for construction frameworks, industrial equipment, and structural applications.

 

3. Excellent Formability

DX51D steel is known for its good ductility and bending quality, allowing easy shaping, cutting, and fabrication. This property makes it highly adaptable for complex designs and industrial manufacturing processes.

 

4. Versatile Surface Options

Available in mini, small, regular, or large spangle finishes, the surface can be tailored to aesthetic or functional requirements. The smooth, high-quality galvanized layer ensures paint adhesion and surface durability.

 

5. Cost-Effective & Long-Lasting

Hot-dipped galvanization significantly extends the steel's service life while minimizing maintenance needs. The combination of high durability and cost efficiency makes DX51D Z275 3.8mm an excellent choice for industrial and commercial projects.

 

Technical Specifications

 

Parameter Description
Steel Grade DX51D
Zinc Coating Z275 (g/m²)
Thickness 3.8 mm
Width 1000 – 1500 mm (customizable)
Length 2000 – 6000 mm (customizable)
Surface Finish Mini / Small / Regular / Large Spangle
Technique Hot-Dipped Galvanized (GI)
Edge Mill Edge / Cut Edge
Application Construction, Industrial Fabrication, Automotive, Roofing, Agricultural Equipment
Standard GB/T, EN, JIS, ASTM compliant
Delivery Within 15–25 days after deposit confirmation

 

Common Applications

 

Construction & Building: Roofing sheets, wall panels, steel frames, gutters, and downspouts.

Industrial Equipment: Machinery panels, storage tanks, silos, and protective covers.

Automotive & Transportation: Vehicle body panels, chassis components, and exhaust shields.

Agriculture: Greenhouses, fencing, storage silos, and equipment protection.

Home Appliances: Outer casings for washing machines, refrigerators, air conditioners, and other appliances.

 

Products Advantages

 

Long Service Life: The Z275 coating resists rust and corrosion for extended periods.

High Structural Integrity: Thick 3.8 mm steel ensures strength for heavy-duty applications.

Excellent Workability: Easy to cut, bend, and fabricate for diverse industrial needs.

Customizable Options: Multiple spangle finishes and dimensional flexibility for different projects.

Cost Savings: Reduced maintenance, long-lasting performance, and competitive pricing.

 

Contact now

 

info-576-573

 

Q1: What is DX51D+Z steel?
DX51D+Z is a continuously hot-dip galvanized cold-rolled low carbon steel grade according to EN 10346. "DX51D" indicates the base steel with standard ductility, and "+Z" denotes a zinc coating on both sides for corrosion protection.

 

Q2: Which standard governs DX51D+Z steel?
DX51D+Z is produced under EN 10346, which specifies requirements for continuously hot-dip coated flat steel, including chemical composition, mechanical properties, zinc coating mass, surface quality, and dimensional tolerances.

 

Q3: What are the typical mechanical properties of DX51D+Z?
DX51D+Z usually has a tensile strength of approximately 270–410 MPa, a yield strength of around 140–280 MPa, and a minimum elongation of 23% (A80). These properties allow basic forming, bending, and light stamping.

 

Q4: How does DX51D+Z differ from DX53D+Z and DX54D+Z?
DX51D+Z has lower strength and elongation than DX53D+Z or DX54D+Z, making it suitable for general purpose applications where extreme forming or deep drawing is not required.

 

Q5: What does the "+Z" designation mean?
The "+Z" indicates a continuous hot-dip zinc coating applied on both sides of the steel. This sacrificial layer provides corrosion protection, extending the lifespan of the material in mild atmospheric conditions.

 

Q6: What zinc coating weights are available for DX51D+Z?
Typical zinc coating weights are Z10, Z15, Z20, Z25, and Z30, representing total zinc mass on both sides in g/m². Higher zinc weights offer better corrosion resistance but may slightly reduce formability.

 

Q7: Is DX51D+Z weldable?
Yes, DX51D+Z can be welded with standard resistance or arc welding methods. However, localized zinc evaporation occurs during welding, so ventilation and proper process control are recommended.

 

Q8: Can DX51D+Z be formed or bent?
DX51D+Z is suitable for general forming, bending, and light stamping operations. It is less suitable for deep drawing or complex shapes compared to DX53D+Z or DX54D+Z due to its lower elongation.

 

Q9: What are the surface quality requirements for DX51D+Z?
The surface should be free of major defects such as cracks, heavy zinc runs, blistering, or rust. Minor imperfections that do not affect processing or end-use performance are acceptable per EN 10346.

 

Q10: What are common applications of DX51D+Z steel?
DX51D+Z is widely used in automotive components with minimal forming requirements, appliance panels, light construction elements, roofing sheets, ducts, and general corrosion-protected flat steel applications.

SEND INQUIRY

SEND INQUIRY