Home-Knowledge-

Content

Dx51d specification

Aug 30, 2023

DC51D-Z(2).pdf

DX51D is a designation for a specific grade of galvanized steel according to the European standard EN 10346. Here's a general specification for DX51D galvanized steel:


Mechanical Properties:

Tensile Strength: 270 - 500 MPa
Yield Strength: 140 - 300 MPa
Elongation: 22% - 38%
Hardness (Rockwell B): 50 - 70 HRB

 

Coating Specifications:

Coating Type: Hot-dip galvanized (DX51D+Z) or electrogalvanized (DX51D+ZF)
Coating Mass: Varies based on standard and thickness, often specified in grams per square meter (g/m²)

 

Thickness Range:

Typically, DX51D steel sheets come in various thicknesses ranging from around 0.2 mm to 3.0 mm, though specific requirements can lead to variations.
Width and Length:

The width and length of DX51D steel sheets can vary based on manufacturer and application needs.

 

Surface Finish:

Regular spangle, minimized spangle, or zero spangle, depending on the desired appearance and functionality.

 

Applications:

Roofing, siding, automotive parts, appliances, structural components, and general manufacturing.
Please note that specific DX51D specifications can vary based on the manufacturer, country, and intended use. It's important to refer to the official data sheets provided by the manufacturer for precise and up-to-date information on chemical composition, mechanical properties, coating specifications, and other relevant details.

SEND INQUIRY

SEND INQUIRY