Home-Knowledge-

Content

DS Type C Cold Rolled Coil

Oct 20, 2025

Cold Rolled Coil

cold rolled steel suppliers near me

DS Type C Cold Rolled Coil

The stamping performance is better than Type B, close to deep drawing grade (DDS).

The lower phosphorus content (P≤0.02%) reduces cold brittleness and improves ductility.

For parts that require deeper drawing or complex shapes (such as fuel tanks, lampshades).

  • DS = Drawing Steel

Indicates that the steel is designed for the drawing, stamping, forming process and has better ductility and formability than the basic grade (CS - Commercial Steel).

 

  • Type A, B, C = Sub-type

Distinguishes the range of mechanical properties and chemical composition requirements (especially carbon, manganese, phosphorus content) of different grades.

 

Products Description

 

Characteristic DS Type A DS Type B DS Type C
Main goal Basic punching performance Standard punching performance Higher punching performance
Strength and hardness Relatively high Medium Relatively low
Scalability Basic level Common level Better

 

Chemical composition restrictions Relatively loose Moderate Stricter
Phosphorus content (P) ≤0.025% ≤0.025% ≤0.02%
Applicable scenarios Simple stamping/bending Most stamping parts Complex shapes/deep drawing

 

Click to get today's price list!

Typical Applications

 

DS Type C Cold Rolled Sheet Steel: Precision deep drawing expert

 

High-value application scenarios:

🔹 Auto parts: oil pan (deep drawing ratio 2.2), seat belt retractor housing, ABS valve body

🔹 High-end home appliances: range hood fan cover (curved surface stretching), coffee machine extraction chamber

🔹 Electronic devices: lithium battery housing (explosion-proof valve punching), relay shield

 

Technical advantages:

▶ Solve the problem of orange peel during stamping (surface roughness Ra≤0.6μm)

▶ Avoid necking cracking (uniform elongation ≥22%)

 

cold rolled galvanized steel

Relationship with other grades of American Standard


Basic grade: CS Type A/B/C (Commercial Steel) → For general use (such as SPCC/DC01).

 

Deep drawing grade: DDS Type A/B/C (Deep Drawing Steel) → Better performance than DS type, used for complex deep drawing parts (such as SPCE/DC05).

 

Extra deep drawing grade: EDDS (Extra Deep Drawing Steel) → Highest formability (such as DC06/SPCF).

 

Selection Recommendation


Prefer DS Type B: covers most stamping needs and is cost-effective.

 

Need deep drawing or complex forming → choose DS Type C or upgrade to DDS series.

 

Simple processing/cost-sensitive → DS Type A or CS series.

 

Packaging and Shipping

 

cold rolled products

 

SEND INQUIRY

SEND INQUIRY