Home-Knowledge-

Content

DIN EN 10130 DC07 Cold Rolled Steel Coil

Dec 01, 2025

Cold Rolled Steel DC07

 

What is Cold Rolled Steel DC07?

 

Cold Rolled Steel DC07 Extra Deep Drawn is rapidly becoming one of the most demanded steel grades for high-performance automotive and appliance production. As product shapes become more complex and consumer expectations for durability and surface aesthetics continue to rise, manufacturers require a material that delivers both formability and flawless appearance-and DC07 meets these standards exceptionally well.

Cold Rolled Steel DC07

Core mechanical behavior

DC07 belongs to the family of cold-rolled steels developed for extra deep drawing. It is characterized by:

  • Very low carbon content
  • High r-value and n-value for maximum stretchability
  • Superior thickness control and dimensional accuracy
  • Excellent resistance to surface defects during work-hardening

Even under severe forming load, DC07 maintains uniform deformation without cracking, thinning or ridging. This makes it suitable for high-precision stamped parts where conventional commercial steels like SPCC or standard drawing grades like SPCD cannot meet requirements.

 

Industrial value and production efficiency

 

Where DC07 brings long-term economic advantages:

  1. Reduced defect rate during forming and coating
  2. Lower tooling wear due to improved steel consistency
  3. Less material waste in deep forming processes
  4. Higher success rate in automated stamping and robotic production lines

Manufacturers using DC07 see measurable improvements in both cost control and product quality.

 

Application scenarios

DC07 has become the preferred material for:

Automotive inner structural panels, fuel system parts, safety covers, decorative trim

Home appliance casings, washing machine barrels, refrigerator skins, metal furniture

Electrical and communication equipment housings requiring precise bending and deep forming

Its excellent paintability and plating compatibility ensure long service life even in humid, corrosive or high-wear operating environments.

 

Cold Rolled Steel DC07

Comparison with other grades

Cold rolled steel grades such as DC04, DC05 and DC06 also offer reliable forming performance, but DC07 provides the highest level of extra deep-draw capability and surface perfection, making it ideal for the most demanding applications.

 

Mechanical Properties
Steel Grade Yield Strength (MPa) min Tensile Strength (MPa) min Elongation Old Description
% min
DC01 ≤280 270-410 28 St 12-03
DC03 ≤240 270-370 34 St 13-03
DC04 ≤210 270-350 38 St 14-03
DC05 ≤180 270-330 40 St 15-03
DC06 ≤170 270-330 41 –
DC07 ≤150 250-310 44 –

 

GNEE STEEL also produces other cold-rolled steel grades. If you have any needs for cold-rolled steel plates, cold-rolled steel coils, galvanized steel plates, or galvanized steel coils, please contact us. We will provide you with the latest quotation!

 

FAQ

1. What is the surface finish of DC07?
The cold rolling process gives DC07 a smoother and more textured surface finish than hot-rolled steel, and the surface usually feels oily to the touch.
2. Can the thickness and width of DC07 steel be customized?
Yes. The thickness range of DC07 is usually from 0.3 mm to approximately 3.9 mm, and the width is usually between 600 mm and 2000 mm. Specific dimensions can be customized according to customer requirements.
3. Why is DC07 cold-rolled steel more expensive than hot-rolled steel?
The cold rolling process requires more processing steps and energy, and provides superior surface quality and tighter tolerance control, resulting in higher production costs.
4. What are the standard packaging and transportation conditions for DC07 steel coils?
They are usually bundled with steel straps and transported in containers. Humidity control is required during transportation to prevent moisture from accelerating corrosion.

 

SEND INQUIRY

SEND INQUIRY