Home-Knowledge-

Content

Differences among SPCC, SPCD and SECC

Jul 31, 2024

Applicable grades: SPCC, SPCD, SPCE
Symbols: S-Steel, P-Plate, C-Cold Rolling, C-Common, D-Drawing, E-Elongation
Heat treatment status: A-Annealing, S-Annealing + Flattening, 8-(1/8) Hard, 4-(1/4) Hard, 2-(1/2) Hard, 1-Hard.
Drawing performance level: ZF-for the most complex parts to be drawn, HF-for the most complex parts to be drawn, F-for the most complex parts to be drawn.
Surface processing status: D-pitted surface (roller is shot peened after grinding), B-bright surface (roller is finely processed by grinding)
Surface quality: FC-high-level finishing surface, FB-higher-level finishing surface.
SPCC is a common cold-rolled carbon steel plate with high strength and good plasticity, and is easy to cold process and weld. It has high surface quality and is suitable for making general mechanical parts, structural parts and containers, etc.
SPCD is a cold-rolled carbon steel plate for deep drawing, which has better deep drawing performance and tensile strength, and is suitable for making parts that require deep processing.
SPCE is an electrolytic plate, and its surface is electrolytically treated, which has higher corrosion resistance and aesthetics.

SPCC, SPCD, SPCE sheet

SEND INQUIRY

SEND INQUIRY