Home-Knowledge-

Content

Cold-Rolled Steel Sheet for Appliances: DC01 to DC07

Oct 11, 2025

Introduction

This article explains cold-rolled steel sheet for appliances in grades DC01 to DC07. Home appliance manufacturers select steel grades by the forming severity of the part and the finish of the visible surface. Deep-drawing grades and coated steels supply the shells, liners and structural parts of refrigerators, washing machines, ovens and air conditioners.

Forming Requirements

Appliance shells such as refrigerator doors and washing machine drums are deep drawn, so the steel must stretch without splitting and hold a smooth surface through the press. Grades such as DC04 to DC07 and their equivalents supply the required ductility, and the surface finish is matched to the paint quality of the final product.

Coated and Prepainted Materials

Galvanized and galvannealed steels protect the internal parts of appliances from moisture, and color-coated steel is used for visible panels to combine decoration with corrosion resistance. Electro-galvanized SECC and hot-dip DX grades are common substrates, with the coating selected by the part location and the warranty requirement.

Part Grade Requirement
Refrigerator liner DC04/DC06 Deep drawing
Washing machine drum Deep-drawing coated Forming + corrosion
Visible panel Prepainted coil Finish + durability
Internal structure SECC / DX grades Corrosion resistance

Applications by Appliance

Refrigerator liners and doors, washing machine drums and cabinets, microwave housings, air conditioner casings and heater panels are typical parts. Each part is produced at high speed, so consistency of thickness, temper and surface is essential.

Verification

Confirm the grade, mechanical properties, surface finish and coating on the mill certificate, and run forming trials to validate the delivered coil before mass production.

FAQ

1. Which steel grades are used in appliances? Deep-drawing grades such as DC04 to DC07 plus coated and prepainted substrates.
2. Why is deep-drawing steel needed? Shells and liners are formed in deep draws that require high ductility.
3. What is SECC? Electro-galvanized cold-rolled steel used for appliance parts.
4. Where is prepainted steel used? Visible panels where decoration and corrosion resistance are combined.
5. What matters in mass production? Consistent thickness, temper, surface and forming behavior.
6. What should be verified? Grade, mechanical properties, surface finish and coating mass.
SEND INQUIRY

SEND INQUIRY