Cold Rolled Steel
What is Cold Rolled Steel ?
DC01, DC02, DC03, DC04, DC05, DC06 are standardized European cold-rolled low-carbon steels specified in EN 10130 for parts that require very good formability and consistent surface quality. For general structural press-formed components, DC03–DC06 are the common choices; DC01 and DC02 are suitable when slightly higher strength or different deoxidation practice is acceptable.
Cold Rolled Steel Specifications - DC06 Supply Range from GNEE STEEL
| Item | Specification Range |
|---|---|
| Thickness | 0.25 mm – 3.0 mm |
| Width | 600 mm – 2000 mm |
| Coil ID | 508 mm / 610 mm |
| Coil Weight | 3 – 30 MT |
| Surface | Bright, matte, dry, oiled, skin-passed |
| Form of Supply | Coil / Slit Coil / Cut-to-Length Steel Sheet |
| Edge Condition | Mill edge or slit edge |
| Packaging | Seaworthy export packing with rust protection |
Cold Rolled Steel Grades Comparison - Formability Levels
| Grade | Formability Level | Material Category |
|---|---|---|
| DC01 | Standard forming | Cold rolled carbon steel |
| DC03 | Improved forming | Cold rolled deep drawing steel |
| DC04 | High forming | Cold rolled deep drawing steel |
| DC05 | Very high forming | Cold rolled special deep drawing steel |
| DC06 | ⭐ Extra-deep forming (highest) | Cold rolled extra-deep drawing steel |
Performance Comparison Table - DC06 vs Other Grades
| Attribute | DC01 | DC04 | DC06 |
|---|---|---|---|
| Surface Smoothness | ★★☆☆☆ | ★★★☆☆ | ⭐⭐⭐⭐⭐ |
| Risk of Cracking in Deep Drawing | High | Medium | Very low |
| Coating / Painting Compatibility | Good | Very Good | Excellent |
| Rejection Rate during Stamping | High | Medium | Lowest |
| Best Suitable Applications | General stamping | Home appliances | Automotive exterior panels & high-precision deep drawing |
Why DC06 Is Becoming a Substitute for Cold Rolled Stainless Steel in Cost-Sensitive Products?
| Comparison Criteria | DC06 Cold Rolled Steel | Cold Rolled Stainless Steel |
|---|---|---|
| Material Cost | ⭐ Low | High |
| Surface After Coating | Very smooth, similar to stainless | Similar |
| Formability | Superior (extra deep drawing) | Good |
| Scratch Resistance | Medium | High |
| Recommended Use Scenario | Painted or coated applications requiring extreme formability | High-corrosion environments |
Whether buyers are researching DC06 steel equivalent, comparing cold rolled steel grades, evaluating cold rolled steel specifications, or seeking a reliable supplier of DC06 material with high formability, GNEE STEEL offers global inventory, competitive pricing and professional export service.
DC06 coils and sheets can be delivered worldwide in both standard and customized specifications to support automotive, appliance, energy, precision metal fabrication and industrial production lines.
FAQ
Q: What is DC06 cold-rolled steel?
A: DC06 is a European standard (EN 10130) cold-rolled, ultra-low carbon steel grade, known for its superior deep-drawing quality and excellent cold formability.
Q: What standard does DC06 steel conform to?
A: It primarily conforms to the European standard EN 10130:2006, which specifies requirements for cold-rolled flat products in soft steels for cold forming.
Q: Is DC06 hot-rolled or cold-rolled?
A: DC06 is a cold-rolled steel, meaning it is processed at room temperature, which provides better dimensional control and a finer surface finish than hot-rolled steel.
Q: What is the material number for DC06?
A: The material number for DC06 is 1.0873.



