DC01 to DC04: Exploring the Performance Grades of Cold-Rolled Steel
The "DC" in DC01 originates from DIN 1623-1 (the German standard for cold-rolled steel) and represents low-carbon cold-rolled strip and sheet in flat steel products. This standard specifies the performance characteristics of cold-rolled strip and sheet, ensuring high-quality products.
DC01 to DC04: Differences in Performance Grades of Cold-Rolled Steel
In the field of cold-rolled steel, DC01, DC02, DC03, and DC04 represent different performance grades. These grades are named after DIN 1623-1, which specifies the performance characteristics of cold-rolled steel. Higher numbers indicate better tensile strength, resulting in significant differences in deep-drawing performance among these four grades.
In the field of cold-rolled steel, the four grades of DC01, DC02, DC03, and DC04 represent different performance characteristics. As the number increases, the tensile strength of these cold-rolled steels improves. Specifically, DC01 is typically used for simple bending, while DC02 is suitable for shallow drawing operations, but is primarily used for bending. DC03 is considered a drawing plate, and its tensile properties are already quite good. As for DC04, it has the best tensile properties of the four grades and is well-suited for deep drawing.
Furthermore, these cold-rolled steel grades comply with multiple international and domestic standards. For example, ST12 (DC01) in the German standard DIN 1623 aligns with the European standard EN 10130 DC01, the Japanese standard JIS G 3141 SPCC, and the American standard ASTM A1008M CS. These standards provide strong guarantees for the production and quality of cold-rolled steel.
|
Standard |
AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. |
|
Material |
Q195, Q215,Q235,Q345,ST37, A36,45# ,16Mn, SPHC,SGCC,CGCC |
|
Thickness(mm) |
Cold Rolled Thickness:0.2mm-3mm |
|
Width(mm) |
45mm-2200mm, As Your Request |
|
Technique |
cold rolled |
|
Surface |
Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request |
|
Coil ID |
508-610mm or as per your request |
|
Coil Weight |
3~5 Tons or as per your request |
|
Application |
Construction, machinery manufacturing, container manufacturing, shipbuilding, bridges, etc. |
|
Packing |
Standard Export packing(Plastic film in the first layer,second layer is Kraft paper.
Third layer is galvanized sheet) |

GNEE STEEL Our Advantages
1.Factory Direct more than 20 years of production and operation
2.Acceptable and small batch production
3.Has passed the international standard quality test
4.7*24 hours professional team service
5.Fast delivery date as short as seven days
6.One-step sales service to ensure after-sales level



