Common grades of galvanized steel vary by region, standard and application. Below are some common galvanized steel grades that you can refer to depending on your country and the standards used:
SGCC: A galvanized steel coil grade widely used in Chinese national standards, representing general commercial quality cold rolled base material, hot dipped galvanized.
DX51D: A galvanized steel grade commonly found in European standards, representing a galvanized steel coil with a cold rolled base material with good corrosion resistance.
ASTM A653/A653M: The American ASTM standard for galvanized steel coils, including different grades and grades, such as Type CS, Type DDS, etc.
JIS G3302: Japanese JIS standard for galvanized steel coils, including different grades, such as SGHC, SGH400, SGH440, etc..
EN 10346: European Standard for Cold Rolled Mild Steel Plates and Strips for Continuous Hot Dip Galvanizing, including grades such as DX51D, DX52D, etc.
GOST 14918: Russian standard for galvanized steel coils with different grades of steel and coatings.
ISO 3575: Standard in the International Standards Organization (ISO) for continuous hot dip galvanizing of steel sheets and strips, including different grades.
Please note that these are just examples of some common grades of galvanized steel and that many other grades and standards actually exist. When it comes to choosing the right grade of galvanized steel, you can contact us directly and we will give you the most satisfactory answer.
