What Is DC07 Cold-Rolled Steel?
DC07 is a super deep-drawing grade cold-rolled steel sheet under standard DIN EN 10130. This grade is designed for the highest formability demands, making it especially suitable for applications requiring complex shapes, deep draws, stretching, and high dimensional precision. Compared with more common cold-rolled grades (DC01–DC06), DC07 offers lower yield strength and higher elongation - giving manufacturers greater flexibility and minimizing spring-back during forming.
GNEE STEEL provides DC07 cold-rolled sheets that meet EN 10130 specifications, ensuring stable chemical composition, consistent mechanical properties, and excellent surface finish. This makes DC07 a prime choice when surface quality, deformation capability, and tight tolerances are critical.
Key Mechanical & Chemical Properties of DC01–DC07
| Grade | Maximum Yield Strength (Re or Rp0.2, MPa) | Tensile Strength (Rm, MPa) | Minimum Elongation (%) | Typical Use-Case / Formability Level |
|---|---|---|---|---|
| DC01 | ≤ 280 (chinaxinogroup.com) | 270–410 (chinaxinogroup.com) | ≥ 28 (chinaxinogroup.com) | Basic forming, mild bending, welded parts |
| DC03 | ≤ 240 (chinaxinogroup.com) | 270–370 (chinaxinogroup.com) | ≥ 34 (chinaxinogroup.com) | Moderate forming, stamped parts |
| DC04 | ≤ 210 (chinaxinogroup.com) | 270–350 (chinaxinogroup.com) | ≥ 38 (chinaxinogroup.com) | Appliance panels, moderate deep-drawing |
| DC05 | ≤ 180 (chinaxinogroup.com) | 270–330 (chinaxinogroup.com) | ≥ 40 (chinaxinogroup.com) | Drawn shells, medium deformation parts |
| DC06 | ≤ 170 (chinaxinogroup.com) | 270–330 (chinaxinogroup.com) | ≥ 41 (chinaxinogroup.com) | High-formability parts, thin-wall components |
| DC07 | ≤ 150 (chinaxinogroup.com) | 250–310 (thyssenkrupp-materials-processing-europe.com) | ≥ 44 (thyssenkrupp-materials-processing-europe.com) | Super deep-drawing, complex stamped/drawn parts |
Note: Mechanical ranges follow the EN 10130 norm for cold-rolled low-carbon steels; actual values may vary slightly with thickness, processing route, and heat treatment.
Why DC07 Is Vital for Deep-Drawing & Complex Forming
Outstanding Ductility & Elongation: With a minimum elongation of ~44%, DC07 can endure extensive deformation without cracking - ideal for deep-drawn, stretch-formed, or heavily shaped parts.
Lower Yield Strength for Easier Forming: The lower yield limit (≤ 150 MPa) reduces required forming forces and minimizes spring-back, enhancing dimensional accuracy and repeatability.

Consistent Surface Quality & Thickness Control: As a cold-rolled product, DC07 sheets maintain uniform thickness and smooth surface finish, reducing preprocessing and enabling high-quality painting or coating.
Suitability for Thin-Gauge Applications: DC07 excels in thin to medium gauges (e.g. 0.5 mm – 3.0 mm), making it highly suitable for enclosures, appliance shells, automotive panels, and lightweight metal components requiring both formability and precision.
Typical Applications for DC07 Cold-Rolled Sheets
Automotive interior/exterior stamped parts (body panels, inner shells)
Appliance housings/shells (refrigerators, washing machines, ovens)
Furniture and metal cabinets needing deep-drawn or bent shapes
Electrical enclosures and thin-wall metal boxes
Consumer goods requiring both formability and clean surfaces
Because of its extreme formability and stable sheet quality, DC07 produced by GNEE STEEL is especially suited for high-volume manufacturing where consistent output and minimal scrap are essential.
Why Choose GNEE STEEL for Your DC07 Needs
GNEE STEEL offers DC07 cold-rolled sheets in a variety of gauges and widths, with reliable EN 10130 compliance. We guarantee:
- Stable chemical composition and mechanical properties across batches
- Tight thickness tolerance and flatness
- Smooth surface suitable for coating or painting
- Flexible coil or cut-to-length delivery formats
If your project demands the highest formability, precision and finish - request a quote from GNEE STEEL. Our DC07 line is engineered to meet the most demanding deep-drawing and stamping requirements.


