Cold Rolled Steel
Why Use Cold Rolled Low-Carbon Steel for Forming?
Cold rolled low-carbon steel (DC-series) offers superior machining performance: excellent ductility, high elongation, and uniform surface quality - making it ideal for deep drawing, bending, stamping, and other cold forming operations.
With low carbon content and controlled deoxidation, these steels are less prone to cracking or fracture during forming - increasing yield rate and improving manufacturing efficiency.
Formability Hierarchy: DC01, DC02, DC03, DC04, DC05, DC06
| Grade | Forming Capability / Best Use |
|---|---|
| DC01 | Standard forming / simple stamping, profiling, parts where deep draw isn't required (SteelPro) |
| DC03 | Light drawing / mild stamping, simple shell components, housings (European Steel Business Group) |
| DC04 | Moderate deep drawing, appliance panels, automotive light parts, reasonable complexity (products.tatasteelnederland.com) |
| DC05 | High-quality deep drawing, parts requiring better elongation and lower yield strength, complex shapes (steelplatesforsale.com) |
| DC06 | Extra-deep drawing, most demanding shapes, minimal springback, large deformation parts, automotive body, fuel tanks, precision stamped components (MWalloys) |

Material and Supply Advantages for DC03–DC06 at GNEE STEEL
Controlled chemical composition and tight quality control to ensure stable formability and consistent mechanical properties across batches.
Multiple supply forms - coils, slit coils, cut-to-length - convenient for diverse manufacturing needs.
Suitable surface finishes for downstream processes: painting, coating, galvanizing, plating, or bare-metal stamping.
Industries & Application Scenarios Where DC03–DC06 Excel
Automotive: Door panels, body shells, inner reinforcement parts, fuel tanks - deep draw, high strength and low springback required.
Home Appliances: Washing machines, refrigerators, kitchen appliances - smooth surface and good coating adhesion needed, often with deep-drawn shells.
Furniture & Electrical Goods: Sheet metal housings, metal cabinets, HVAC enclosures, radiators - combining formability, weldability, and surface finish.
General Metal Fabrication & Stamping: Brackets, enclosures, housings, chassis - needing reliable material behavior and consistent quality.
Why Manufacturers Prefer DC03–DC06 Over Hot-Rolled or Commercial Steel
Better surface finish & less post-processing: Cold rolled DC steel usually needs less grinding or smoothing before painting or coating.
Improved dimensional accuracy & tolerance: Cold-rolled process achieves tighter thickness/width variation, which helps in precision stamping and automated forming.
Higher yield of acceptable parts: Low defect rate due to stable properties, especially when using DC05 / DC06 for deep drawing.
Flexibility: Variety of grades available depending on forming depth - one supplier (GNEE STEEL) covers full range, simplifying procurement.
We are manufacturer of steel products. We have quality steel coils and sheets for sale. Except for GI coils and sheets, we also have GL, PPGI, PPGL, Corrugated sheet, etc. to choose from. The standard seaworthy package contains waterproof kraft paper and plastic film inside, and steel sheets outside, then bound with steel strips. To secure it during transportation, we use wood pallets. During the two decades, we have developed complete systems from pre-sales consulting to after-sales service. Welcome to contact us for more information!

FAQ
1.Which DC grade is best for deep-drawn automotive inner panels?
DC05 or DC06, with DC06 used for the most demanding draw depths due to lower C and higher r-value.
2.Can DC01 be electro-galvanized?
Yes. when galvanizing is required use EN 10152 (DC01+ZE) and specify surface finish and coating mass.
3.How long after delivery should I form DC01 parts?
EN 10130 recommends forming DC01 soon; extended storage may reduce formability. For DC03–DC05 mechanical properties are guaranteed for longer (EN provides the details).
4.Are DC-grades weldable?
Yes, standard welding processes apply; for coated products ensure fume controls and adjust parameters.
5.Do mills offer DC grades in coil and sheet/cut-length?
Yes; coils, slit coils and cut lengths are standard. Confirm coil weight and edge condition at order.


