Steel DC04 quality for enamelling and deep drawing is a premium cold rolled steel grade that sets the standard for high-precision manufacturing, offering unmatched performance in both deep drawing and enamelling applications. For industrial terminal manufacturers, GNEE STEEL delivers consistent, high-quality DC04 cold rolled steel coils that enable the production of complex, durable components with superior surface finishes.

Cold-rolled steel coils
What Makes Steel DC04 Ideal for Enamelling and Deep Drawing
DC04 cold rolled steel coil is engineered to address the unique challenges of enamelling and deep drawing processes. Its low carbon content and refined microstructure provide exceptional ductility, while its clean surface ensures optimal enamel adhesion-two critical factors for industrial manufacturers producing high-quality components.
Unlike lower-grade cold rolled steel, DC04 maintains dimensional stability during both forming and enamelling, reducing scrap rates and ensuring consistent part quality. This makes it a preferred choice for manufacturers in sectors where precision and durability are non-negotiable.
Chemical Composition of DC04 Cold Rolled Steel Coil
The chemical composition of steel DC04 quality for enamelling and deep drawing is carefully balanced to enhance both formability and enamelling performance. Strict control over impurities ensures minimal defects and maximum compatibility with enamel coatings.
Aluminum is added to refine the grain structure, improving ductility and surface quality, while low sulfur and phosphorus content reduce the risk of brittleness during deep drawing and enamelling.
|
Element |
Carbon (C) |
Silicon (Si) |
Manganese (Mn) |
Phosphorus (P) |
Sulfur (S) |
Aluminum (Al) |
|---|---|---|---|---|---|---|
|
Max Content (%) |
≤0.07 |
≤0.03 |
≤0.35 |
≤0.018 |
≤0.008 |
≥0.030 |
Mechanical Properties of DC04 for Enamelling and Deep Drawing
DC04's mechanical properties are optimized for deep drawing, with high elongation and a high r-value that allows for extreme forming without failure. These properties also ensure the material can withstand the high temperatures of the enamelling process without warping.
For industrial terminal manufacturers, this translates to consistent production, reduced waste, and components that meet the strictest quality standards. The material's low hardness also reduces tooling wear, lowering long-term production costs.
|
Property |
Tensile Strength (MPa) |
Yield Strength (MPa) |
Elongation (A50, %) |
Hardness (HRB) |
r-value (Average) |
|---|---|---|---|---|---|
|
Standard Range |
240 - 330 |
110 - 190 |
≥45 |
45 - 60 |
≥2.1 |

Cold-rolled steel laboratory
Enamelling Compatibility of DC04 Steel
Steel DC04 quality for enamelling and deep drawing is specifically designed to bond with enamel coatings, ensuring a smooth, durable finish that resists corrosion, chipping, and fading. Its clean, oxide-free surface eliminates pores and defects in the enamel layer, improving both aesthetics and performance.
Whether used for decorative or functional components, DC04's enamelling compatibility makes it ideal for kitchen appliances, bathroom fixtures, and industrial equipment that requires a hygienic, easy-to-clean surface.
Deep Drawing Applications for DC04
DC04's exceptional deep drawing performance makes it suitable for a wide range of industrial applications. From automotive components like fuel tanks and door panels to home appliance parts like washing machine drums and refrigerator liners, DC04 delivers consistent results.
Industrial terminal manufacturers also use DC04 for complex hardware components, electrical enclosures, and medical equipment parts, where precision and durability are critical. Its ability to form deep, intricate shapes without defects reduces production time and costs.
GNEE STEEL's Supply and Service Advantages
GNEE STEEL maintains a large inventory of steel DC04 quality for enamelling and deep drawing, ensuring timely delivery to industrial terminal manufacturers worldwide. Our flexible supply options, including FOB, CFR, and CIF terms, accommodate diverse logistics needs.
We also provide custom processing services, including slitting, cut-to-length, and custom oiling, to meet specific manufacturing requirements. Our technical team is available to offer guidance on material selection and processing parameters, helping you optimize production efficiency.
For industrial terminal manufacturers seeking a reliable, high-performance material for enamelling and deep drawing, steel DC04 quality is the perfect choice. GNEE STEEL's commitment to quality, consistent supply, and professional service ensures that you get the best possible product to support your manufacturing goals.
Don't compromise on quality-partner with GNEE STEEL for your DC04 cold rolled steel coil needs. Contact us today to discuss your specific requirements, get a free quote, and experience the difference that premium DC04 can make in your production process.


