Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of 35kv class three phase oil-immersed distribution transformer in China. Welcome to wholesale customized 35kv class three phase oil-immersed distribution transformer at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.
35KV Class Three Phase Oil-Immersed Distribution Transformer
35kV class three phase oil immersed distribution transformers comply with the standard of ANSI C57.12.00, IEC60076, GB1097 (Power transformer) and GB/T6451 (Technical parameter and requirements for three phase oil-immersed power transformer), both no-load loss and on-load loss are much lower, good quality C.R.G.O.core type, high-quality oxygen-free copper coil, good appearance, safe operation, widely used over the country.
The performances of model S9-M, S10-M, S11-M 10kv-35KV series full-sealed oil-immersed distribution transformes conform to Standards IEC IEEE. Its core is made of quality cold-rolled silicon sheet and is of a full-miter non-puncture structure and its coil is made of quality oxygen-free copper.
It adopts radiator oil tank of corrugated shteet type or expansion type. As it doesn't need oil conservator, the height of transformer is reduced, and as the transformer oil doesn't contract with air, the oil ageing is retarded, thus prolonging the service life of transformer.
Products features
1. The transformer core is made of imported high-quality cold-rolled silicon steel sheet, which greatly reduces no-load loss and no-load current. The core is tightly bound to ensure the compactness and reduce noise.
2. The high and low voltage windings are made of oxygen-free copper. The low voltage winding of 500KVA and below is of double-layer cylinder structure, of 630kVA and above adopt double helix or four helix structure. High-voltage winding adopts multi-layer cylinder structure.
3. Dyn11 is used in the transformer connection group to reduce the influence of harmonics on the power grid and improve the quality of power supply.
4. The transformer is a fully sealed structure, with three coats of primer and one coat of finish paint applied on the inner and outer surfaces. The product is salt fog proof, moisture proof and fungus-proofing, beautiful, durable and reliable
5. The measured noise value is lower than the standard and maintenance free under normal operation.
Products parameters
| Rated Capacity (kVA) |
H.V. winding (kV) |
Tapping range of high voltage (%) |
L.V. winding (kV) |
Vector Group | No-Load Loss(W) |
Load Loss (W) |
No-load current (%) |
Short-circuit impedance (%) |
|||
| 50 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 |
33 |
±5% ±2x2.5% |
0.4 |
Dyn11 Yyn0 |
130 185 215 225 270 320 385 465 545 665 785 920 1120 1350 1590 1890 |
1200/1140 2010/1910 2370/2260 2820/2680 3320/3160 3950/3760 4750/4530 5740/5470 6910/6580 7860 9400 11500 13900 16600 19700 23200 |
1.3 1.10 1.10 1.00 1.00 0.95 0.95 0.85 0.85 0.65 0.65 0.65 0.6 0.6 0.55 0.55 |
6.5 | |||
35KV Class Three Phase Oil-Immersed Distribution Transformer
FAQ
Q: How to buy it? What about the delivery?
A: Please contact me by email or online, let me know your situation, I will give you professional solution. We have shipping agent can choosing the cheapest and fastest delivery. FOB, CIF, C&F or EXW are no problem for us.
Q: Could you offer some spare parts?
A: Yes, no problem.
Q: What about the maintenance?
A: All the goods past the test, maintenance is very easy.
Q: What is the standard of package?
A: Export standard package or special package according to customer's requirement.
Q: Why should I choose GNEE?
A: After comparing the quality, delivery, and price of the same products, you will find out the answer.
Hot Tags: 35kv class three phase oil-immersed distribution transformer, China 35kv class three phase oil-immersed distribution transformer manufacturers, suppliers, factory
