Home-Products - Prepainted Galvanized Steel-

Content

video

Prepainted Galvanized Steel A653

Hot-dip galvanized ASTM A653 has an added layer of corrosion protection with a zinc-coating on both sides. One of the benefits for this product grade is its aesthetically pleasing finishing character. It can be left unpainted and will look nice. Perhaps the main advantage to ASTM A653 zinc-coated steel is its workability. It takes well to being welded, formed, machined, sheared, and drilled without cracking or damaging structural integrity.

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of prepainted galvanized steel a653 in China. Welcome to wholesale customized prepainted galvanized steel a653 at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.

 

Definition

A653/A653M – Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron AlloyCoated (Galvannealed) by the Hot-Dip Process

This specification covers steel sheets, zinc-coated (galvanized), or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths.

ASTM A653 vs. ASTM A653 G90

ASTM refers to the American Society for Testing and Materials Standards.

A-653 is one of its branch standard numbers.

ASTM A653 is the standard specification for hot-dipped galvanized iron alloy or galvanized steel sheets.

ASTM A653 G90 refers to the ASTM A653 specification, the galvanized layer code G90 represents the meaning that the sum of the two-sided zinc coating is 0.9 oz/ft2 (the average minimum value of three points on both sides) or 0.8 oz/ft2 (the smallest single point on both sides) value).

ASTM A653 G90 refers to the galvanized steel sheet, the material grade is G90 (according to ASTM A653 standard), thickness 3.2 mm.

The American standard is special. There are both metric weight units (g/m2) such as Z90 and British weight units (oz/ft2) such as G90. The weight difference between the two is about 3 times.

ASTM A653 advantages

Thin-coated hot-dip galvanized materials have excellent welding ability and processing performance. It can be used from general use to deep drawing and can be selected according to the purpose.

Thick galvanized hot-dip galvanized materials have excellent corrosion resistance. Various applications can be used by selecting spangles and post-processing functions.

Hot-dip alloy steel not only has excellent corrosion resistance but also has good adhesion and ductility of the coating, so it can exert excellent processing performance. The advantage is that it has a beautiful appearance and can be used for applications where the surface is not painted.

ASTM A653 equivalent

ASTMA653 is an American standard, which is equivalent to the Japanese JIS G 3302, Europe EN 10346. Hot-dip galvanized steel sheet with a coating thickness of 0.3 oz/square inch. The material has general specifications.

ASTM A653 Classification

The material is available in several designations as follows:

Commercial Steel (CS Types A, B, and C),

Forming Steel (FS Types A and B),

Deep drawing steel (DDS),

Extra deep drawing steel (EDDS),

Structural steel (SS),

High strength low alloy steel (HSLAS Type A), and

High strength low alloy steel (HSLAS Type B).

ASTM A653 thickness tolerance

Thickness(mm) allowable deviation   Width  
  Up Down ≤1000 >1000~≤1300
0.1 0.03 0.03    
0.15 0.04 0.04    
0.2 0.05 0.05    
0.25 0.05 0.05    
0.3     0.03 ---
0.4     0.04 0.04
0.5 0.08 0.08    
0.5     0.045 0.05
0.6     0.05 0.05
0.75 0.1 0.1    
0.8     0.05 0.05
1 0.13 0.13    
1     0.055 0.06
1.2     0.08 0.08
1.25 0.13 0.13    
1.5     0.08 0.08
1.75 0.15 0.15    
2 0.18 0.18    
2     0.1 0.1
2.25 0.2 0.2    
2.5 0.23 0.23    
2.5     0.1 0.11
2.75 0.25 0.25    
3 0.25 0.25    
3     0.13 0.13
3.25 0.3 0.3    
3.5 0.3 0.3    
3.75 0.36 0.36    
4 0.36 0.36    
4     0.17 0.17
4.99 0.36 0.36    
5     0.17 0.17
6     0.17 0.2
8     0.17 0.22

ASTM A653 grade and Chemical composition

Composition, %
-Heat Analysis
Element, max
(unless otherwise shown)
Designation Carbon Manganese Phosphorus Sulfur CuB Ni B CrB MoB vC CbC, D Ti
Ss Grade                      
33[230] 0.20 ... 0.04 0.04 0.20 0.20 0.15 0.06 0.008 0.008 0.30
37[255] 0.20 ... 0.10 0.04 0.20 0.20 0.15 0.06 0.008 0.008 0.30
40[275 0.25 ... 0.10 0.04 0.20 0.20 0.15 0.06 0.008 0.008 0.30
50[340] Class 1 and 2 0.40 ... 0.20 0.04 0.20 0.20 0.15 0.06 0.008 0.008 0.30
50[340] Class 3 0.50 ... 0.04 0.04 0.20 0.20 0.15 0.06 0.008 0.008 0.30
80[550] 0.20 ... 0.04 0.04 0.20 0.20 0.15 0.06 0.008 0.008 0.30
HSLAAS Type A                      
40[275] 0.20 1.20 ... 0.035 ... 0.20 0.15 0.06 0.008 0.008 0.30
50[340] 0.20 1.20 ... 0.035 0.20 0.20 0.15 0.06 0.008 0.008 0.30
60[410] 0.20 1.35 ... 0.035 0.20 0.20 0.15 0.06 0.008 0.008 0.30
70[480] 0.20 1.65 ... 0.035 0.20 0.20 0.15 0.06 0.008 0.008 0.30
80[5501 0.20 1.65 ... 0.035 0.20 0.20 0.15 0.06 0.008 0.008 0.30
HSLASTypeB5F                      
40[275] 0.15 1.20 ... 0.035 ... 0.20 0.15 0.06 0.008 0.008 0.30
50[340] 0.15 1.20 ... 0.035 0.2 0.21 0.15 0.06 0.008 0.008 0.30
60[410] 0.15 1.20 ... 0.035 0.20 0.22 0.15 0.06 0.008 0.008 0.30
70[480] 0.15 1.65 ... 0.035 0.20 0.23 0.15 0.06 0.008 0.008 0.30
80[550] 0.15 1.65 ... 0.035 0.20 0.24 0.15 0.06 0.008 0.008 0.30

ASTM A653 Mechanical properties

CLASSIFICATION TYPE YIELD STRENGTH
(Mpa) Min.
TENSILE STRENGTH (Mpa) Min. ELONGATION in 50mm Min.(%)
ASTM A653 CS type A 170/380 – ≥ 20
CS type B 205/380 – ≥ 20
CS type C 170/410 – ≥ 15
FS type A 170/310 – ≥ 26
FS type B 170/310 – ≥ 26
DDS 140/240 – ≥ 32
EDDS 105/170 – ≥ 40
SS-Gr 230/Gr A/ Gr 33 230 310 20
SS-Gr 255/Gr B/ Gr 37 255 360 18
SS-Gr 275/Gr C/ Gr 40 275 380 16
SS-Gr 340 C1/Gr D/ Gr 50 340 450 12
SS-Gr 340 C2/Gr E/ Gr 50 340 – 12
SS-Gr 340 C3/Gr F/ Gr 50 340 480 12
SS-Gr 550/Gr E/ Gr 80 550 570 –

 

 

Prepainted Galvanized Steel A653

Hot Tags: prepainted galvanized steel a653, China prepainted galvanized steel a653 manufacturers, suppliers, factory, galvanized steel sheets with prepainted surface for landings, prepainted galvanized steel for stadiums, galvanized steel with prepainted finish for water treatment plants, galvanized steel with prepainted layer for warehouses, galvanized steel prepainted for exhibition halls, galvanized steel sheets with prepainted surface for airport terminals

SEND INQUIRY

SEND INQUIRY