Home-Products- Galvanized Steel - Galvanized Steel Sheet-

Content

video

DX54D+Z Galvanized Steel Sheet

Standard: ASTM, JIS, GB, AISI, DIN, BS
Tolerance: ±1%, 0.01mm
Surface Treatment: Galvanized
Zinc Coating: 30g---275g/sqm
Coil Weight: 2.5---12Tons

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of dx54d+z galvanized steel sheet in China. Welcome to wholesale customized dx54d+z galvanized steel sheet at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.

 

About GNEE:

The alloyed high-grade steel DX54D (extra deep drawing quality) is deliverable with following hot-dip coatings:
DX54D+Z (coating Zn), DX54D+ZF (coating Zn-Fe), DX54D+ZA (coating Zn-Al), DX54D+AZ (coating Al-Zn), DX54D+AS (coating Al-Si). The coating mass for Z amounts to 100, 140, 200, (225), 275 g/m², for ZF to 100, 120 and (140)** g/m², for ZA to 95, 130, 185, 200, 255 and 300* g/m², for AZ to 100, 150 and 185 g/m², for AS it amounts to 60, 80, 100, (120) und (150) g/m². The parenthesis values are deliverable after arrangement the values are in each case both side minimum values (three-faced specimen). The * marked values are not deliverable for the surface types B and C and the ** marked values are not deliverable for the surface type C (see also DIN EN 10327).

 

DX54D+Z galvanized steel coil is hot-dip galvanized alloy steel, which adopts hot-dip galvanizing process and has good chemical and mechanical properties. We are the manufacturer and supplier of DX54D+Z galvanized steel coil in China. We only provide qualified The DX54D+Z galvanized steel coils provide customers with steel coil products with the best quality and reasonable prices. Let's learn about the applications of our DX54D+Z galvanized steel coils.

product information

Specimen testing: tensile, bending, specimen transverse direction
Process: hot-dip galvanizing, galvanizing, color coating, color coating, etc.
Surface treatment: chrome plating, galvanizing, oil coating, light oiling, drying, anti-fingerprint
Packaging: Wrapped with waterproof paper inside, covered with galvanized steel plate outside, bundled with steel straps, supported by pallets, packed in containers or as per customer requirements


Applications: Steel structures, building exterior wall applications, building materials, roofing furniture, applications, pipe making, etc.
If you are interested in our DX54D+Z hot-dip galvanized steel coils, please feel free to contact us and we will answer you as soon as possible. We only provide qualified DX54D+Z hot-dip galvanized steel coil products to provide our customers with the best The quality and reasonable price, you are welcome to call us for quotation.

Product Name Galvanized sheet
Thickness 0.12mm~10mm
Width 100mm~2000mm
length customer required(1-12m)
Zinc Coating 40g/m2-275g/m2
Tolerance Thickness:±0.01mm, Width: ±5mm, Length: ±5mm
Surface Regular spangle,minimal spangle,zero spangle ,bright and big spangle
Technique Cold Rolled

 

Properties according to DIN EN 10 346 Steel type

Short designation VDA239-100 Surface finish Material number
DX54D CR3 +Z,+ZA 1.0952
DX54D CR3 +ZF,+ZM 1.0952
DX54D - +AZ 1.0952
DX54D CR3 +AS 1.0952


DX54D | 1.0952: Mechanical properties (transverse)

Yield strength 1) Re MPa max. Tensile strength Rm MPa Elongation at 2) fracture A80 % min. Anisotropy r90 min. Strain hardening exponent n90 min.
120–220 260–350 36 1.64) 0.18
120–220 260–350 34 1.44) 0.18
120–220 260–350 36 - -
120–220 260–350 34 1.44)5) 0.185)


DX54D | 1.0952: Chemical composition (heat analysis)

Percentage by weight % max.          
C Si Mn P S Ti
0.12 0.50 0.60 0.10 0.045 0.30

1) Where no yield strength is defined, the respective values shall apply to the 0.2 % proof stress Rp0.2, otherwise for the lower yield strength (ReL).

2) Reduced minimum values of elongation at fracture apply to product thicknesses 0.50 mm < t < 0.70 mm (minus 2 units), 0.35 mm < t < 0.50 mm (minus 4 units), and t < 0.35 mm (minus 7 units).

3) The maximum yield strength for surface class A is Re = 360 MPa.

4) For product thicknesses of 1.5 mm < t < 2 mm, the minimum r90 value is reduced by 0.2, and for t ≥ 2 mm by 0.4.

5) Depending on the product thickness, the minimum r90 value is reduced as follows: 0.50 mm < t < 0.70 mm by 0.2; 0.35 mm < t < 0.50 mm by 0.4, and t < 0.35 mm by 0.6.

Also depending on the product thickness, the minimum n90 value is reduced as follows: 0.50 mm < t < 0.70 mm by 0.01; 0.35 mm < t < 0.50 mm by 0.03, and t < 0.35 mm by 0.04.

DX54D+Z Galvanized Steel Plate

 dx54d

Galvanized Steel Sheet For Industrial

About GNEE

GNEE is a professional supplier and manufacturer of galvanized steel. It has cooperated with customers in different countries and has great influence. The GNEE factory covers an area of 80,000 square meters and is one of the largest manufacturers of cold rolled galvanized products in Henan. We have sufficient inventory of galvanized steel coils, and we always have regular specifications. The weight of the zinc layer can be customized. Welcome to inquire about the latest price of the product!

DX54D Galvanized Steel Sheet

Hot Tags: DX54D+Z Galvanized Steel Sheet, China DX54D+Z Galvanized Steel Sheet manufacturers, suppliers, factory, Formability Of S550GD Z Galvanized Sheet, steel galvan sheet, Hot Dip Galvanized Steel Plate Material, SGC400 Galvanized Steel, Dipped Galvanized Steel, Galvanized Sheet Metal 4x8

SEND INQUIRY

SEND INQUIRY