Home-Products- Galvanized Steel - Galvanized Steel Coil-

Content

video

Cold Rolled Galvanized / Galvanised Steel Coils For PPGI

Special Use:Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel
Stock:Stock
Thickness:0.3-500mm
Width:1000,or Customized

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of cold rolled galvanized / galvanised steel coils for ppgi in China. Welcome to wholesale customized cold rolled galvanized / galvanised steel coils for ppgi at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.

 

Galvanized steel coil:

Galvanized Steel has been around for centuries. To put it simply, it is made by coating zinc onto the steel substrate to protect it from rusting.

 

Enough Zinc Coating
Zinc layers can be produced from 30g to 550g and can be supplied with hot dip galvanizing, electric galvanizing and pre-galvanizing.
Provides a layer of zinc production support after inspection report.

 

In hot-dip galvanization, the base metal is dipped into a bath of molten zinc at 450 °C. The zinc coating is thicker. Cold galvanizing is where the zinc salt solution is plated to the base metal by the process of electrolysis. This process does not involve any kind of heating. During the process of cold galvanizing, the zinc is deposited on the base metal at the anode which is thin and may not be uniform. As it is conducted in a wet environment, the coating layer of zinc can come off quite easily.

 

Generally, materials that are simply galvanized may last at least 30 years. The addition of zinc on the outside, as well as the metallurgical process that will occur, will allow it to last many extra decades. It's also possible to get similar results by having a zinc-iron alloy instead.

 

Cold rolled galvanized coil is a metal material that uses cold-rolled steel as the base material and is coated with a layer of zinc on the surface through electrolysis or hot-dip galvanizing. It has the following characteristics:
1. Good anti-corrosion performance: The galvanized layer can effectively prevent metal materials from oxidation and corrosion.
2. High strength and hardness: After cold rolling, the hardness and strength of the steel plate are significantly improved.
3. Good appearance quality: The galvanized layer has a bright surface effect and can provide the material with better appearance quality.

Product Name

galvanized steel coil

Length

1-12m or as required

Width

0.6m-3m or as required

Thickness

0.1mm-300mm or as required

Standard

AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc.

Technique

Cold rolled,hot rolled

Surface Treatment

Clean, blasting and painting according to customer requirement

Thickness tolerance

±0.15mm

Material

SGCC/GCC/SPCC/ SPHC/ DX51D/DX52D 

Q345,Q345A,Q345B,Q345C,Q345D,Q345E,Q235B
HC340LA,HC380LA,HC420LA
B340LA,B410LA
15CRMO,12Cr1MoV,20CR,40CR,65MN
A709GR50

Coatings

Top Coats :5 micron primer + 20 micron colour Back Coat: 5 micron primer – 7 micron primer

MOQ

1tons.We also can accept sample order.

Shipment time

Within 15-20 workdays after receiving deposit or L/C

Export packing

Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

 

Criteria for hot dipped galvanized steel:
Corrosion resistance is mainly determined by the thickness of the galvanized layer, so measuring the thickness is often the main basis for judging the quality of galvanized. The galvanized layer has different reactions depending on the composition, organization and structure of the steel surface. In addition, the zinc in and out The angle and speed of the solution also have a great influence. Therefore, it is actually impossible to obtain a completely uniform coating thickness in advance. Therefore, measuring the amount of adhesion must not be judged by a single point (location). It is meaningful to measure the average weight of zinc attached (g) per unit area (㎡). There are many methods to measure the adhesion amount, such as destructive slice metallographic observation method, pickling method, non-destructive film thickness meter method, electrochemical method, import and export weight difference estimation method, etc. Generally used are the film thickness gauge method and the pickling method.

 

The most rusty part of hot-dip galvanized steel is still the thinnest part of the zinc layer, so it is necessary to test whether the thinnest part meets the standards.


The uniformity test method generally uses copper sulfate test, but this method is very problematic for the test of galvanized layer film composed of zinc layer and alloy layer. This is because the zinc layer and the alloy layer have different dissolution rates in the copper sulfate test solution, and the alloy layer also has different zinc/iron ratios. Therefore, it is not very reasonable to judge the uniformity based on the number of repetitions of a certain immersion time.


Therefore, in recent European and American standards and JIS, there is a tendency to abolish this test method, replace uniformity with distribution, focus on visual inspection or touch, and use a film thickness meter to check the distribution status only when necessary. In addition, it is difficult to measure the area of small components with complex shapes and find the average film thickness. Sometimes the copper sulfate test method has to be used as a reference, but the copper sulfate test must not be used to replace the purpose of adhesion measurement.

Cold Rolled Galvanised Steel Coils:

ppgl steel coil

 

Cold Rolled Galvanized Steel Coils Surface:

hot dipped galvanized steel coils

 

Cold Rolled Galvanized / Galvanised Coils Packing:

galvanized coil price

 

GNEE STEEL:

prepainted galvanized steel coil

 

galvanised steel coil

FAQ:

Q1. Are you trading company or manufacturer ?

A: We are a factory. Our factory locates in Henan province. If you would like to visit our factory,just inform us in advance, we warmly welcome all of our clients to visit us.
Q2: How long is your delivery time?

A: Generally, it is 10-15 days after receiving the deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q4. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, etc
Q5. What is your sample policy?
A: We can supply free samples if we have ready parts in stock, but the courier cost are charged.
Q6: What are your main products?
A: Our main products are as follows: galvanized sheets, galvanized coils, cold rolled steel, ppgi, etc.

Hot Tags: Cold Rolled Galvanized / Galvanised Steel Coils For PPGI, China Cold Rolled Galvanized / Galvanised Steel Coils For PPGI manufacturers, suppliers, factory, Dx51D Galvanized Steel Coil, Metal Galvanized DX52D Z Steel Coil, Hot Dipped Cold Rolled Galvanized Steel Coil, SGCD Galvanized Steel Coil, Galvanized Steel Coil Dx52d Z Gi Coils, Metal Galvanized Steel DX52D+Z Coil

SEND INQUIRY

SEND INQUIRY