Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of cold rolled galvanized steel dc01 st12 coil in China. Welcome to wholesale customized cold rolled galvanized steel dc01 st12 coil at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.
Galvanized coil:
ST12 is a cold rolled low carbon steel. It is also known as DC01 in other international standards. ST12/DC01 is a commonly used grade in the automotive, electrical, and general manufacturing industries due to its excellent formability and suitability for cold forming processes.
ST12/DC01 steel typically has a maximum carbon content of 0.1% and is characterized by its excellent surface quality, uniformity, and flatness. It has a relatively low tensile strength, which makes it suitable for applications that do not require high strength. The steel is often used for components that undergo bending, drawing, and deep drawing operations, such as automotive parts, appliances, metal furniture, and various stamped or pressed components.
Chemical composition and mechanical properties of ST12
| Chemical composition% | ||||||
| Grade | C | Mn | P | S | Alt | Ti% |
| DC01(St12) | ≤0.10 | ≤0.50 | ≤0.035 | ≤0.025 | ≥0.020 | 一 |
| Mechanical properties | |||
| Grade | YS | TS | EL |
| DC01(St12) | 130~260 | ≥270 | ≥28 |
What are the advantages of ST12?
Cold-rolled low carbon steel ST12 (or DC01) offers several advantages due to its specific properties and manufacturing process. Here are some of the key advantages:
1. Excellent Formability: ST12 possesses excellent formability, making it highly suitable for cold forming operations such as bending, drawing, and deep drawing. It can be easily shaped into various complex forms without significant cracking or deformation, allowing for the production of intricate components and parts.
2. Superior Surface Quality: The cold rolling process gives ST12 a smooth, uniform surface finish. This high-quality finish is ideal in applications where appearance is important and is galvanized to make it even more corrosion-resistant. Conducive to applications in automotive panels, appliances or products that require painting or coating. Smooth surfaces also reduce friction and improve the overall performance of moving parts.
3. Consistency and Dimensional Accuracy: Cold-rolled steel, including ST12, is manufactured with tight tolerances and precise control over its thickness and dimensional characteristics. This consistency ensures that the produced parts have uniform dimensions and can be easily assembled, minimizing the need for additional machining or adjustment.
4. Good Weldability: ST12 exhibits good weldability, allowing for the joining of components through welding processes. It can be welded using various methods, including resistance welding, spot welding, and arc welding, making it versatile for different manufacturing applications.
5. Cost-Effective: Low carbon steel, such as ST12, is generally more cost-effective compared to higher carbon steels or alloyed steels. The lower cost makes it a preferred choice for a wide range of applications where high strength is not the primary requirement.
What are the disadvantages of ST12?
While ST12 (or DC01) offers several advantages, it also has some limitations or disadvantages that should be considered in certain applications. Here are a few disadvantages of ST12:
1. Lower Strength: ST12 is a low-carbon steel with relatively lower tensile strength compared to higher-strength steels or alloyed steels. This lower strength may limit its suitability for applications that require high load-bearing capacity or structural integrity. It may not be the best choice for applications where strength is a critical factor.
2. Limited Hardness: ST12 has limited hardness due to its low carbon content. While this can be an advantage for certain forming processes, it may not be ideal for applications that require high wear resistance or hardness properties, such as cutting tools or components subject to abrasive wear.
3. Susceptible to Corrosion: Like other carbon steels, ST12 is susceptible to corrosion, especially in environments with high moisture or exposure to corrosive substances. Without appropriate corrosion protection measures, the steel may rust or deteriorate over time. Proper coating or surface treatment is often necessary to enhance its corrosion resistance.
4. Lack of Temperature Resistance: ST12 is not specifically designed for high-temperature applications. It may exhibit reduced strength and dimensional stability when exposed to elevated temperatures. In situations where components are subjected to significant heat, alternative steel grades with higher temperature resistance may be more suitable.
What is ST12 usually used for?
ST12, a low-carbon cold-rolled steel grade, finds application in various industries due to its excellent formability, surface quality, and cost-effectiveness. It is commonly used in the automotive industry for producing components like panels, brackets, and structural parts that require intricate shapes and smooth finishes. In the electrical sector, ST12 is utilized for manufacturing electrical enclosures, transformer cores, and other equipment requiring good formability and dimensional accuracy. Additionally, it is employed in general manufacturing for producing stamped or pressed components, metal furniture, appliances, and a wide range of consumer goods. The advantages of ST12, such as its formability, surface quality, consistency, and weldability, make it a versatile and desirable choice for applications where low-carbon steel with excellent cold-forming properties is needed.
Gi Galvanized Steel Coil show:

Galvanized coil packing:

About GNEE:

GNEE Team:

Hot Tags: Cold Rolled Galvanized Steel DC01 ST12 Coil, China Cold Rolled Galvanized Steel DC01 ST12 Coil manufacturers, suppliers, factory, Hot Dipped Galvanized Steel Coil For Roofing, Dx53d Galvanized Steel Coil, Zinc Coated Galvanized Iron Coil Sheet For Roofing, Electro Galvanized Zinc Aluminum Steel Coil, Coils Steel Roof Steel Galvanized, Hot Dipped Galvanized Steel Coils










