Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of dc01 dc04 cr metal sheet in China. Welcome to wholesale customized dc01 dc04 cr metal sheet at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.
GNEE CR STEEL:
Dc01 steel plate is a steel plate processed by cold rolling process, also known as cold plate. This type of steel plate has good surface quality and no iron oxide scale. Its tensile strength is 270-410mpa, the yield strength is 130-260mpa, and it elongates after breaking. The rate is not less than 28%. Compared with hot-rolled steel plates, its mechanical properties and process properties will be better.
Cold rolled steel is often used in applications where accuracy and surface finish are important. DC01 is a cold forming steel mainly used in the manufacturing of parts in the automotive, electrical appliances and electronics industries. Compared with other steel materials, DC01 has higher strength, hardness and fatigue resistance, as well as good plasticity and toughness. These characteristics make DC01 a high-quality, cost-effective steel material.
|
Material
|
Q195, Q235,Q255,Q275,SS400,A36, SM400A,St37-2, SA283Gr, S235JR, S235J0 etc
|
|
Thickness
|
0.2-500mm, etc
|
|
Width
|
600-4000mm, etc
|
|
Length
|
2000mm, 2438mm, 3000mm, 3500, 6000mm,12000mm, etc
|
|
Standard
|
ASTM,AISI,JIS,GB,DIN,EN
|
|
Technique
|
Cold Rolled, Hot Rolled
|
|
Certification
|
ISO 9001, CE
|
|
Price terms
|
FOB, CRF, CIF, EXW all acceptable
|
|
Delivery Detail
|
Inventory About 5-7; custom-made 25-30
|
|
Loading port
|
Tianjian, Shanghai, Qingdao
|
|
Payment Terms
|
T/T, L/C at sight,West Union,D/P,D/A,Paypal
|
Available Standards And Grades
| GB/T5213-2008 | din1623 | EN 10130-2006 | JIS G3141-2005 | ISO 3574-1999 | ASTM A1008M-07 |
| DC01 | ST12 | DC01 | SPCC | CR1 | CS Type C |
| DC03 | ST13 | DC03 | SPCD | CR2 | CS Type A,B |
| DC04 | ST14,ST15 | DC04 | SPCE | CR3 | DS Type A,B |
| DC05 | DC05 | SPCF | CR4 | DDS | |
| DC06 | ST16 | DC06 | SPCG | CR5 | EDDS |
| DC07 | DC07 | - | - | - |
Chemical Composition
| Name | Chemical Composition | |||||
| C max | Mn max | P max | S max | Alts min | Ti max | |
| DC01 | 0.1 | 0.5 | 0.035 | 0.025 | 0.020 | |
| DC03 | 0.08 | 0.45 | 0.030 | 0.025 | 0.020 | |
| DC04 | 0.08 | 0.40 | 0.025 | 0.020 | 0.020 | |
| DC05 | 0.008 | 0.30 | 0.020 | 0.020 | 0.015 | 0.2 |
| DC06 | 0.008 | 0.30 | 0.020 | 0.020 | 0.015 | 0.2 |
| Mechanical | ||||||
| Name | Yield Strength | Tensile Strength | Elongation After Fracture | |||
| Nominal Thickness | ||||||
| 0.7 | 0.7-1.0 | 1.0-1.6 | 1.6 | |||
| DC01 | 130-260 | 270 | 28 | 30 | 32 | 34 |
| DC03 | 120-240 | 270 | 32 | 34 | 35 | 36 |
| DC04 | 120-210 | 270 | 36 | 38 | 39 | 40 |
| DC05 | 110-190 | 260 | 36 | 38 | 39 | 40 |
| DC06 | 100-180 | 250 | 39 | 40 | 41 | 42 |
Product Stamping Grade
| DC01 | General Use |
| DC03 | Drawing |
| DC04 | deep drawing quality |
| DC05 | extra-deep drawing quality |
| DC06 | super extra-deep drawing quality |
The European Standard Dc01 applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of inquiry and order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet.
It does not apply to cold rolled narrow strip (rolling width < 600 mm) nor to flat cold rolled products for which there is a specific standard, in particular the following:
cold rolled non-grain oriented magnetic steel sheet and strip (EN 10106);
semi-processed steel strip for the construction of magnetic circuits (EN 10126 and EN 10165);
blackplate in coils (EN 10205);
cold rolled flat products in high yield strength steels for cold forming (EN 10268);
cold rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139);
cold rolled low carbon steel flat products for vitreous enamelling (EN 10209).
Cold rolled low carbon DC01 DC03 DC04 DC05 DC06 steel sheet plate strip coil
DC01 DC04 Cr Metal Sheet Product Advantages:
1. Wide Specifications Range;
2. Pure steel chemical composition;
3. Outstanding mechanical properties;
4. Good performance after welding;
5. Good shape and high precision;
6. Excellent corrosion-resistant and long service life.
Cr Metal Sheet:

GNEE factory:

Cold rolled steel coil manufacturers:

About GNEE:

FAQ:
Q: What about cold rolled steel samples? Is it free or does it cost extra?
A: Normally, we would like to provide samples before ordering. If the sample is in stock, it will be free. If samples need to be produced, we will charge some reasonable fees. But this amount will be deducted from your first order invoice.
Q: How long is your delivery time?
A: Our daily inventory is over 8,000 tons, so orders for regular product sizes only require 7 days of inventory. If there is a special size order, it will take 7-15 days.
Hot Tags: DC01 DC04 Cr Metal Sheet, China DC01 DC04 Cr Metal Sheet manufacturers, suppliers, factory, galvanized steel machining supplies, galvanized steel standard supplies, galvanized steel product development price, SS400 Plate, galvanized steel demand, Dx51d Dx52d Dx96d Steel Coil Factory Price Galvanized










