Q235 Steel Equivalent, Properties

Name: China Customized Q235 Steel Equivalent, Properties Manufacturers Suppliers Factory - GNEE
Brand: GNEE
SKU: 224997095

Q235 steel is a plain carbon structural steel which is widely used in China, Q235 material in Chinese standard GB/T 700 is divided into 4 quality grades: Q235A, Q235B, Q235C and Q235D; Density of this steel is 7.85 g/cm3, tensile strength is 370-500 MPa; yield strength is 235 MPa (data are for steel bar or steel plate diameter ≤ 16mm). Since it’s mild steel, it is used directly without heat treatment.

Send Inquiry

Chat Now

PRODUCT INTRODUCTION

Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of q235 steel equivalent, properties in China. Welcome to wholesale customized q235 steel equivalent, properties at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.

Q235 Steel coils

Features and Applications

Q235 steel has good plasticity, toughness and weldability, as well as a certain strength, good cold bending performance. Q235 material is usually rolled into wire rod or round steel, square steel, flat steel, angle steel, I beam, channel steel, other sections and steel plates. These products are widely used in construction and engineering welded structures, to make steel bars or build factory buildings, high voltage transmission towers, bridges, vehicles, boilers, containers, etc., and also used as a mechanical part with less demanding performance such as less stressed rods, connecting rods, screws, nuts, ferrules, brackets, and stands, etc.

Q235 VS A36, S235

Data Sheet and Specification

The following tables show Q235A, Q235B, Q235C and Q235D steel datasheet and specification, including chemical composition, physical and mechanical properties, etc.

Q235A, Q235B, Q235C, Q235D Steel Chemical Composition

The table below lists Q235 material chemical composition based on heat analysis.

Chemical Composition (heat analysis), %, ≤
Steel Grade	Quality Grade	C	Si	Mn	P	S	Deoxidation Method
Q235	Q235A	0.22	0.35	1.40	0.045	0.050	Rimmed / Killed
	Q235B	0.20	0.35	1.40	0.045	0.045	Rimmed / Killed
	Q235C	0.17	0.35	1.40	0.040	0.040	Killed
	Q235D	0.17	0.35	1.40	0.035	0.035	Exceptionally Killed

Q235 Steel Properties

The following list summarizes Q235 steel properties including physical and mechanical properties.

Physical Properties

Notes:

10-6·K-1 = 10-6/K

1 Ω·mm²/m = 1 μΩ·m

1 g/cm3 = 1 kg/dm3 = 1000 kg/m3

1 GPa = 1 kN/mm2

1 MPa = 1 N/mm2

Physical Properties
Density, g/cm3	7.85
Melting point, ℃	about 1493
Specific heat capacity, J/(Kg·K)	470 at 20 ℃
Electrical resistivity, μΩ·m	about 0,15 (20 ℃)
Elastic modulus, GPa (kN/mm2)	200
Thermal conductivity, (W/m·K)	53-49 (0-100 ℃)
Coefficient of thermal expansion, (10-6/K)	11.3-11.6 (20 ℃)
Young's modulus, GPa (kN/mm2)	200
Poisson's ratio	0.24-0.28

Mechanical Properties

Yield strength and tensile strength are listed in the table below.

1 MPa = 1 N/mm2

		Yield Strength (MPa, ≥); Thickness or Dia. (d) mm					Tensile Strength (MPa)
Steel Grade	Quality	d≤16	16< d ≤40	40< d ≤100	100< d ≤150	150< d ≤200	d≤100
Q235	Q235A	235	225	215	195	185	370-500
	Q235B
	Q235C
	Q235D