Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of corten steel sheet with cold rolled in China. Welcome to wholesale customized corten steel sheet with cold rolled at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.
Cutting large steel Sheet as your requirements to make the surface of the plate bright by miling and grinding, also can make holes and make angle degrees,and can weld by your drawing.
For the thickness under 30mm, cutting by laser ;For thickness over 30mm, mainly OXY-cut, flame cutting.
For the thickness 200mm steel Sheet, because during the flame cutting, the temperature is very high, so the cutting parts steel Sheet might be broken at the angle part, then our workers will repair the angles to be good condition.
|
Material |
HARDOX500 HARDOX600
|
|
HARDOX500 HARDOX600HARDOX500 HARDOX600Thickness |
8mm-800mm |
|
Width |
1500mm-4200mm |
|
Length |
6000mm-18000mm |
|
Delivery condition |
Cold rolled |
|
Cutting service |
Large steel plate cut to flat plate sizes, or cut to any size by drawing |
|
Deep processing |
After cutting large plate into the general sizes by drawing, milling and grinding, and make angles, polishing, and make special parts |

FAQ
1.Q: Are you trading company or manufacturer ?
A: We are Manufacturer and specialized in stainless steel coil, pipe, strip, round bar, angle bar, channel bar, flat bar with kinds of surface finished processes and decoiled/flattened processing.
2.Q: How long is your delivery time?
A:It takes around 3-5 days for the regular models, and 7 to 10 working days for the special sizes and processing. It is based on the order quantity and requirement..
3.Q: Do you provide samples ? Is it free or extra ?
A:Yes, we would send you small samples for free;
4.Q: What is your terms of payment ?
A: A: 100% T/T advance. ( For small order<$10000.)
B: 30% T/T and balance against copy of documents.
C: 30% T/T advance, balance L/C at sight
D: 30% T/T , balance L/C usance
E: 100% L/C usance.
F: 100% L/C at sight.
5.Q:What's your MOQ(minimum order quantity)?
A: Usually for stainless steel product MOQ at least: 1Tons; the product is different, the minimum quantity is different.
6.Q: What is the usage of your products?
A: It is widely used for elevator and kitchen decoration, Luxury door , wall panel and indoor decoration, advertising board, ceiling corridor, hotel hall, storage rack and kinds of entertainment places, etc.
7.Q: Do you have any assurance for Steel ?
A: It will have the mill test for quality and material report for each shipment.
Hot Tags: corten steel sheet with cold rolled, China corten steel sheet with cold rolled manufacturers, suppliers, factory, Cold Rolled Steel Sheet, Cold Rolled Carbon Steel Sheet, Mild Carbon Cold Rolled Sheet, Stainless Steel Sheet 304, cold roll steel sheets, Cold Rolled Steel Strips









