Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of cold rolled steel dc04 1.0338 in China. Welcome to wholesale customized cold rolled steel dc04 1.0338 at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.
DC04 ( 1.0338 )
| Grade : | DC04 | ||||
| Number: | 1.0338 | ||||
| Classification: | Non-alloy quality steel | ||||
| Standard: |
|
||||
| Equivalent grades: | Go here |
DC04 | 1.0338: Mechanical properties (transverse)
| Yield strength1) Re MPa max. | Tensile strength Rm MPa | Elongation at fracture2) % min. A80 | Anisotropy r903)4) min. | Strain hardening exponent n903) min. |
| 210 | 270-350 | 38 | 1.6 | 0.180 |
DC04 | 1.0338: Chemical composition (heat analysis)
| Percentage by weight % max. | ||||
| C | P | S | Mn | Ti |
| 0.08 | 0.030 | 0.030 | 0.40 | - |
Your product of choice: DC04 | 1.0338
1) Where no yield strength is defined, the respective values shall apply to the 0.2 % proof stress (Rp0.2) or to the lower yield strength (ReL). For thicknesses ≤ 0.7 mm but > 0.5 mm, the maximum yield strength values may be 20 MPa higher. In case of thicknesses ≤ 0.5 mm, the maximum yield limits may be 40 MPa higher.
2) For thicknesses ≤ 0.7 mm but > 0.5 mm, the minimum elongation at fracture may be 2 units lower. For thicknesses ≤ 0.5 mm, the minimum elongation at fracture may be 4 units lower.
3) The r90 and n90 values apply to product thicknesses ≥ 0.5 mm only.
4) For thicknesses > 2 mm, the r90-value is reduced by 0.2.
Hot Tags: cold rolled steel dc04 1.0338, China cold rolled steel dc04 1.0338 manufacturers, suppliers, factory, cold rolled steel for relationship building, cold rolled steel for jis standards, cold rolled steel for competitive advantage, 201 Plate Cold Rolled Steel Sheet, cold rolled steel for accountability, cold rolled steel for compensation and benefits
