JSC270C Cold Rolled Steel

 

JSC270C steel plate is a commercial quality cold rolled steel. JSC270C steel is widely used for parts with common formability requirement, such as gear case, electric device, jack shell, collar rim, wheel dish and compressor case.

 

JSC270C is a kind of graphite cold rolled deep drawing steel plates and steel strips under the standard of JFSA2001-1998. The production of JSC270C cold plates and steel strips is based on the standard of Q/BQB408 . The product quality can be guaranteed.

The dimension of JSC270C cold rolling steel we can supply is 0.3 mm-3.5mm for the thickness,and the width is 120mm-1850mm.

The more information of JSC270C steel shown in the following table

 

JSC 270C cold-rolled steel sheet is used for general shaping and processing of refrigerator and other household appliances hell, oil drums, steel furniture. GNEE STEEL Industry can provide JSC 270C cold-rolled steel including steel grades JSC 270C-JD1, JSC 270C-JD2, JSC 270C-JD3, which are mainly used for the panel of household appliances.

Ask for Sample & Quote

 

GRADE	C% max	Mn% max	P% max	S% max	Alt% min	Ti max
JSC270C	0.10	0.50	0.035	0.025	0.020	-

 

STEEL GRADE	Tensile Strength min	Yield Strength	Elongation min.				r	n
			<0.60	0.60-<1.0	1.0-<1.6	>=1.6	min	min
JSC270C	270	140-270	36	38	40	42	-	-

a when there is no significant yield, RP0.2, otherwise ReL should be used.
b the sample is the P14 sample in GB/T 228 and the sample direction is transverse.
c the requirements of r90 and n90 values apply only to products with the thickness not less than 0.50mm. When the thickness is more than 2.0 mm, the value of r90 is allowed to lower 0.2.

Classification of Quality: