Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of DC01 DC02 Cold Rolled Steel Coil 0.6x1000mm in China. Welcome to wholesale customized DC01 DC02 Cold Rolled Steel Coil 0.6x1000mm at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.
A 0.6 x 1000 mm cold rolled steel coil is about as standard a stock item as the steel industry makes. The material is a low carbon cold rolled sheet in the DC01/DC02 family under EN 10130, or the equivalent SPCC under JIS G 3141, delivered in coil, sheet, plate or strip form. Its appeal is simple: a clean, accurate, formable surface that bends, stamps and paints well, at a price far below stainless or coated products.
DC01 DC02 Cold Rolled Steel Coil
European and Japanese designations describe the same family of cold rolled sheet through different naming systems. DC01 is the general forming grade under EN 10130, DC02 adds a little more formability, and DC03 moves into deep drawing territory. SPCC is the Japanese commercial quality cold rolled steel under JIS G 3141, and in practice it is often treated as a close equivalent to DC01 for commercial applications. When a buyer asks for "SPCC cold rolled," a European-standard supplier will often quote DC01/DC02 equivalents, and the mill certificate states the standard that was actually applied. To avoid surprises, name both the designation and the governing standard on your inquiry; GNEE STEEL will confirm the mapping that the mill can certify.

Specifications
| Parameter | Value | Note |
|---|---|---|
| Grade | DC01 / DC02 / DC03 / SPCC | Confirm mapping to the governing standard |
| Thickness | 0.3 - 6 mm (sheet/coil) | Focus gauge 0.6 mm |
| Width | 1000 - 2000 mm | Focus width 1000 mm |
| Surface | Clean, smooth cold rolled surface; 2B-type finish available | Confirm surface requirement |
| Standards | EN 10130, JIS G 3141; also ASTM, GB | Confirm applicable standard |
| Packing | Standard export seaworthy packing | Waterproof paper + steel shell |
| Delivery | 10 - 15 days after deposit | For stocked specifications |
Applications
The practical range of a 0.6 mm cold rolled coil starts at general sheet metal fabrication - enclosures, housings, cabinets and ductwork where the material is bent and painted after forming. Stamping plants use the same material for brackets, panels and small pressings in volume, where consistent hardness across the coil keeps scrap low. In the appliance and furniture industries, DC01 and SPCC are the base for painted refrigerator and washing machine bodies, and for office furniture panels. And because the cold rolled surface is the right canvas for further coating, this gauge is also the starting point for galvanized and prepainted products sold into building and construction.
Surface and Edge Options
Cold rolled sheet is supplied with either a dull or a bright finish depending on the final application, and with the edges either mill edge or slit edge. Slit edges are the standard for stamping lines, where a clean edge keeps the blanking die working without nicks. The surface is typically lightly oiled to prevent corrosion during transport and storage, and the oil spec can be adjusted for painting lines that prefer a dry surface. If your process requires a particular surface roughness for paint adhesion, state the Ra value in the inquiry so the skin-pass schedule can be aligned.
Processing Services
GNEE STEEL can supply cold rolled material in coil, sheet, plate or strip, and can slit, shear or cut-to-length to your production width. Decoiling service is available for buyers who want tight-tolerance strips for their own presses. Because the same order can be split between coil and sheet, a mixed container is often possible, which keeps unit freight low for smaller projects. Processing tolerances and edge conditions are confirmed at the quotation stage so the delivered material matches what your line expects.
Quality and Documentation
Each delivery carries the mill test certificate showing the grade, dimensions and test results. Before packing, the coil is checked for gauge consistency, edge condition, surface defects and flatness, and the packing is standard export seaworthy quality with waterproof paper and steel shell protection. For contractual or government projects, third-party inspection can be arranged at the production and loading stages, with the report provided before shipment.
FAQ
Q: What is the difference between DC01 and DC02?
A: DC01 is the general forming grade and DC02 offers improved formability under EN 10130. Choose DC02 when the part requires deeper bends or drawing without surface defects.
Q: Is SPCC the same as DC01?
A: They are close equivalents in practical trade use, but they are certified under different standards (JIS G 3141 versus EN 10130). Confirm the standard your project requires.
Q: Can you supply cut sheets from this coil?
A: Yes, cut-to-length sheets are available in common lengths of 1000-6000 mm.
Q: Are free samples available?
A: Yes, samples can be provided so you can check the surface and tolerance before ordering.
Hot Tags: DC01 DC02 Cold Rolled Steel Coil 0.6x1000mm, China DC01 DC02 Cold Rolled Steel Coil 0.6x1000mm manufacturers, suppliers, factory, cold rolled steel for leed certification, cold rolled steel for trust building, cold rolled steel for upcycling, cold rolled steel for competitive advantage, cold rolled steel for innovation, cold rolled steel for local standards










